Blistering Behavior during Oxide Scale Formation on Steel Surface
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Mechanism Analysis of Free-Surface Vortex Formation during Steel Teeming
To develop an effective technology to prevent vortex forming in ladles, the mechanism underlying vortex formation during steel teeming must be studied. For simulations using the numerical simulation software Fluent, a geometric model of the ladle was generated, and initially water teeming in the ladle was simulated for different initial tangential velocities. The results obtained help to verify...
متن کاملFailure Investigation of Hydrogen Blistering on Low-strength Carbon Steel
The current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. For this purpose, some experiments including hardness test, non-destructive test (NDT), metallography, and fractograpghy are conducted. The microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (SEM). The microstructural studies show that t...
متن کاملFormation of Surface Corrosion-Resistant Nanocrystalline Structures on Steel
Engineering materials with nanocrystalline structure could be exploited under simultaneous action of mechanical loading and corrosion environments; therefore, their corrosion resistance is important. Surface nanocrystalline structure was generated on middle carbon steels by severe plastic deformation using the method of mechanical pulse friction treatment. This treatment additionally includes h...
متن کاملFormation of Molybdenum Oxide Nano-whiskers during Heating Compressed Powder
In this study the synthesis of molybdenum oxide nano-whiskers with circular cross-section is performed. In some areas, it was observed that also some whiskers have open tips exhibiting their hollow structures. These whiskers have side dimensions ranging 2-5 μm with an average diameter in the nanometer rang. The structure suggested the vapor-liquid-solid growth mechanism (VLS). Scanning elect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2011
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.51.1696