Bleaching using 30% hydrogen peroxide and sodium hydrogen carbonate

Stability of hydrogen peroxide in sodium carbonate solutions

The rate of decomposition of hydrogen peroxide has been measured in aqueous, concentrated (0.1–1M) reagent-grade sodium carbonate liquors and compared with that in sodium hydroxide liquors at the same pH, temperature, and ionic strength. Over the ranges of temperature (303–323 K), pH (10.0–10.6), and ionic strength (1.5–3.0M), and without peroxide-stabilizing additives, hydrogen peroxide decomp...

An Evaluation of Sodium Carbonate as a Replacement for Sodium Hydroxide in Hydrogen Peroxide Bleaching of CTMP

A series of experiments was performed to evaluate the effect of substituting sodium carbonate for the sodium hydroxide used in peroxide bleaching of spruce CTMP. Three peroxide levels were tested: I , 2, and 4% HzOz, and two levels of causticsubstitution; SO% and 80%. At both the 2% and 4% peroxide levels, substituting 50% of the caustic charge with sodium carbonate decreased the initial bright...

Hydrogen Peroxide, Peracetic Acid and Sodium Percarbonate

Evaluation of Extraradicular Diffusion of Hydrogen Peroxide during Intracoronal Bleaching Using Different Bleaching Agents

Objectives. Extra radicular diffusion of hydrogen peroxide associated with intracoronal teeth bleaching was evaluated. Methods. 108 intact single rooted extracted mandibular first premolars teeth were selected. The teeth were instrumented with WaveOne system and obturated with gutta percha and divided into four groups (n = 27) according to the bleaching materials used. Each main group was divid...

Selective oxidation of sulfides to sulfoxides by a vanadium-based catalyst using 30% hydrogen peroxide

The vanadium-based catalyst, acts as a homogeneous catalyst for the selective oxidation of various kinds of sulfides with 30% aqueous H2O2. Vanadium-based catalyst was successfully used as the oxygen source for the oxidation of sulfides to sulfoxides for the first time. The sulfoxides were obtained in a good way to high yields without any detectable over-oxidation to sulfones under normal condi...