Blasthole jet drilling parameters evaluation by test rig

Ergonomic Exposure Assessment on a Drilling Rig

A Sustainable Evaluation of Drilling Parameters for PEEK-GF30

This paper presents a study of hole quality and energy consumption in the process of drilling a thermoplastic polymeric material, polyether-ether-ketone, reinforced with 30% glass fibers (PEEK-GF30). PEEK-GF30's capacity to be machined has focused on turning operations. Studies of drilling involving thermoplastic polymeric materials have considered materials with other types of matrices, or rei...

Laser Drilling Assisted with Jet Electrochemical Machining

Thermal Response Test While Drilling

Knowledge of the ground thermal conductivity is of importance when designing borehole heat exchanger (BHE) systems. As thermal conductivity for any specific rock type varies due to its mineral content, porosity, pore fluid and anisotropy, it is preferable determined in-situ. Choudhary (1976) suggested a method for determining the thermal conductivity which analysed the heat transfer during the ...

Determination of Blasthole Parameters Based on Field Results (TECHNICAL NOTE).

Correct selection of coefficients for blasthole parameters in Ghalat limestone mine in Shahr-e-kord of Iran has resulted is designing and performing 20 blasting operations. After each blast, fragmented rocks larger than one square meter, called oversize, are estimated and prepared for secondary blasting. Next blasthole pattern were designed based on previous blasting results. The results of the...