Blast Response of Elevated Water Tank Staging with Metallic Damper
نویسندگان
چکیده
In the present paper work an attempt has been made to study dynamic behaviour of elevated water tank staging by using x-plate metallic damper subjected blast induced ground vibrations. The main objective this is reduce damage providing structural response control devices. modelled in SAP 2000 and non-linear time history analysis carried out know performance under four different intensity motions comparing structure without case. After completion analysis, results show that bending moment, shear force displacements are comparatively reduced when compared From observed effectively responses excitations.
منابع مشابه
Optimum Diameter of Tapered Elevated RC Water Tank Staging
Water tank is used extensively for storing water, inflammable liquids and other chemicals. Generally, to provide water at large, tank is supported on frame or shaft (a vertical cylindrical shell). The staging with a single row of columns placed straight (vertical) along the periphery of circle or shaft, are generally adopted for elevated water tanks to support the tank container. Apart from ver...
متن کاملDirect Displacement Based Design of Reinforced Concrete Elevated Water Tanks Frame Staging
Elevated water tanks supported by the reinforced concrete (RC) Staging are classified as inverted pendulum structures. These are considered as structures of high post-earthquake importance and should remain functional after the seismic events. National codes of various countries recommend Force-Based Design (FBD) procedure for water tank staging, which does not ensure nonlinear performance leve...
متن کاملThe Effect of Tuned Mass Damper on Seismic Response of Building Frames with Uncertain Structural Characteristics
Tuned mass dampers (TMDs) could be used to absorb the input energy of the applied load, and reduce the response of the building frames. However, the effectiveness of TMD in reducing the response of the building frames could be affected by inherited uncertainties in the structural characteristics of the frames. In this study, in order to investigate the probabilistic response of steel moment-res...
متن کاملResponse Modification Factor of Chevron Braced Frame With Pall Friction Damper
Response modification factors (R-factor) are used in current seismic building codes to reduce earthquake forces associated with seismic design level to determine force levels. In recent years, many authors have shown great interest in the development of seismic structural systems and several theoretical and experimental studies have been conducted to investigate performance of dampers but littl...
متن کاملDynamic Response and Optimal Design of Curved Metallic Sandwich Panels under Blast Loading
It is important to understand the effect of curvature on the blast response of curved structures so as to seek the optimal configurations of such structures with improved blast resistance. In this study, the dynamic response and protective performance of a type of curved metallic sandwich panel subjected to air blast loading were examined using LS-DYNA. The numerical methods were validated usin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202130901135