Blast Mitigation using Polyurethane Foam to Retrofit Fortified Sandwich Structures
نویسندگان
چکیده
منابع مشابه
joining of al-foam to plate in sandwich structures
structural sandwich beams are widely used because of their high specific stiffness and strength, noise reduction, thermal insulation and impact energy absorption characteristics. conventional manufacturing method of composite sandwich structures is completed by a separate adhesive joining stage by which the composite faces are joined to the core. in this investigation, liquid phase sintering in...
متن کاملAn experimental and numerical study of blast induced shock wave mitigation in sandwich structures
a School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907, USA Department of Mechanical Engineering, Purdue University, West Lafayette, IN 47907, USA c School of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, MA 02139, USA Computation for Design and Optimization Program, Massachusetts Institute of Technology, Cambridge, MA 02139, USA Depart...
متن کاملAnisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملfire behavior of rigid polyurethane foam and metal faced polyurethane sandwich panels and its fire hazard assessment
reaction to fire of fire-retarded rigid pur foams and two types of metal faced rigid polyurethane foam core sandwich panel was evaluated by using cone calorimeter test method. the tests were carried out in various radiative heat fluxes from 15 to 75 kw/m2. the radiation rate effect on reaction to fire parameters, including time to ignition (tti), peak of heat release rate (prhr), total heat rel...
متن کاملModeling and Simulation of Interactions between Blast Waves and Structures for Blast Wave Mitigation
Explosions occur in military conflicts as well as in various industrial applications. Air blast waves generated by large explosions move outward with high velocity, pressure and temperature. The blast waves not only incapacitate military and civilian personnel, but also damages buildings, vehicles, and other properties. Hence, there has been extensive research on how to mitigate blast wave effe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Conference on Civil and Architecture Engineering
سال: 2010
ISSN: 2636-4387
DOI: 10.21608/iccae.2010.44409