Blade-to-Blade Flow at Centrifugal Impeller Exit Under Rotating Stall.
نویسندگان
چکیده
منابع مشابه
Effect of Impeller Blade Exit Angle on the Performance of Centrifugal Pump
-Changing some geometric characteristic of the impeller in centrifugal pumps improves their performance. It is known that blade exit angle plays very important role in the performance of a centrifugal pump. To investigate effect of blade exit angle on the performance of centrifugal pump by means of experiment is very expensive and lengthy process. Due to expensive and lengthy process, it can be...
متن کاملInfluence of Vaned Diffuser on Dangerous Blade Vibration Due to Blade Flow Interactions in a Centrifugal Compressor
Influence of diffuser vane position on dangerous blade vibration due to blade flow interactions at part load operating condition was investigated in a centrifugal compressor. By means of some measurement and analysis techniques a mechanism of interaction between blade vibration and circumferential flow condition in the impeller with vaned diffuser was determined, which is a cause of dangerous b...
متن کاملTurbine Blade Tip Leakage Flow Control: Thick/Thin Blade Effects
An experiment was conducted in a linear cascade of Pak-B blades for an exit Mach number of 0.3 to simulate the flow in the tip-gap region of a low pressure turbine blade row. The experiment focused on the independent effects of thickness-to-gap and gapto-chord ratios on the tip-gap flow behavior. Two extreme gap-to-chord ratios of 5% and 8% were chosen, for which four thickness-to-gap ratios we...
متن کاملWorld Journal of Modelling and Simulation
It is quite well known that the diffusers are required for efficient conversion of the dynamic head generated by the impeller in a centrifugal fan. Hence the flow into the diffuser passage plays a crucial role in determining the efficiency of conversion. The flow in the region bounded by the impeller exit and the diffuser entry i.e. the radial clearance space is generally considered to be highl...
متن کاملNumerical Simulation of Dynamic Stall Phenomena in Axial Flow Compressor Blade Rows
This article explores the simulation of stall phenomena in axial compressor blade rows. The approach is based on the numerical solution of the compressible, two-dimensional Navier-Stokes equations. The results of both unforced and forced low-speed rotor stall are presented. In unforced cases, substantial ow separation is observed before the maximum pressure rise operating point is reached. Thes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series B
سال: 2003
ISSN: 1340-8054,1347-5371
DOI: 10.1299/jsmeb.46.154