Blade pressure loading and torque measurement in a transonic linear cascade

نویسندگان

چکیده

Abstract Experimental results of a transonic compressor blade pressure loadings and shaft torque measurements are presented in this paper. Data were acquired for the cascade middle being set to number incidence angle offsets simulate phases flutter oscillatory motion. This paper should be viewed as progress report on ongoing larger research effort flow regimes.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

experimental study of a transonic flow over a naca0012 airfoil by measurement of pressure fluctuations

in this research, shock wave motion, shock/boundary layer interaction, and flow separation in a transonic flow over a naca0012 airfoil were investigated experimentally. thirteen kulite sensors were utilized for measurement of pressure fluctuations over the airfoil. experiments were performed for angles of attack between -4 to 4 degrees and flow mach numbers of m= 0.39 to 0.82. the kulite sensor...

متن کامل

Dynamic Response of a Composite Propeller Blade Subjected to Shock and Bubble Pressure Loading

The interaction between an underwater explosion and a composite propeller involves several physical phenomena that an accurate numerical simulation needs to capture. These include proper description of the initial explosion shock wave, of its propagation in the water, and of its interaction with the propeller blades and any other neighboring boundaries. In this work, a numerical procedure which...

متن کامل

Aerodynam·ic Pressure and Flow-Visualization Measurement from a Rotating Wind Turbine Blade

Aerodynamic, load, flow-visualization, and inflow measurements have been made on a 10-m, three-bladed, downwind, horizontal-axis wind turbine ( HAWT). A video camera mounted on the rotor was used to record night­ time and daytime video images of tufts attached to the low-pressure side of a constant-chord, zero-twist blade. Load measurements were made using strain gages mounted at every 10% of t...

متن کامل

Turbine Blade Cascade Heat Transfer Analysis Using CFD –A Review

Heat transfer analysis on a turbine blade cascade using CFD is reviewed in this paper based upon the literature available. The flow conditions across turbine blades are complex because of three dimensional configuration of the blade. Axial flow turbine blade design is hectic because understanding of control flows, prediction and analysis is a tedious task. The flow behaviour in a turbine blade ...

متن کامل

Prediction of unsteady loading on a steam turbine blade

A single rotor CFD model using wall-modeled Large Eddy Simulations (LES) was performed to predict the unsteady loading on the blade surface under partial admission. Geometry of the rotor blade of high pressure steam turbine of a 500 MW fossil-fuel power plant was used for this study. Periodically changing inlet boundary model was developed for single rotor model to simplify a full annular of th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of physics

سال: 2023

ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']

DOI: https://doi.org/10.1088/1742-6596/2511/1/012030