Bis-GMA/TEGDMA dental composites reinforced with electrospun nylon 6 nanocomposite nanofibers containing highly aligned fibrillar silicate single crystals
نویسندگان
چکیده
منابع مشابه
Manufacture of Cnt Reinforced Polymer Composites Using Nanofibers Containing Cnt
Carbon nanotubes (CNTs), discovered by Japanese scientist Sumio Iijima, have outstanding material properties such as mechanical, thermal, electrical, and magnetic properties. For example, CNTs are not only lighter than common irons, but also 100 times stronger than the irons. However, CNTs are so tiny, that is, surface area per volume is relatively large. Consequently, they tend to agglomerate....
متن کاملLignin-based electrospun nanofibers reinforced with cellulose nanocrystals.
Lignin-based fibers were produced by electrospinning aqueous dispersions of lignin, poly(vinyl alcohol) (PVA), and cellulose nanocrystals (CNCs). Defect-free nanofibers with up to 90 wt % lignin and 15% CNCs were achieved. The properties of the aqueous dispersions, including viscosity, electrical conductivity, and surface tension, were examined and correlated to the electrospinnability and resu...
متن کاملIn situ Polymerization of Multi-Walled Carbon Nanotube/Nylon-6 Nanocomposites and Their Electrospun Nanofibers
Multiwalled carbon nanotube/nylon-6 nanocomposites (MWNT/nylon-6) were prepared by in situ polymerization, whereby functionalized MWNTs (F-MWNTs) and pristine MWNTs (P-MWNTs) were used as reinforcing materials. The F-MWNTs were functionalized by Friedel-Crafts acylation, which introduced aromatic amine (COC(6)H(4)-NH(2)) groups onto the side wall. Scanning electron microscopy (SEM) images obtai...
متن کاملA novel polyacrylamide nanocomposite hydrogel reinforced with natural chitosan nanofibers.
Polyacrylamide (PAM) was used as a matrix material for fabricating novel nanocomposite hydrogels reinforced with natural chitosan nanofibers (CNFs) via in situ free-radical polymerization. The nanocomposite's structure, strength, morphology and rheological properties were investigated. The results showed that the CNFs had a strong interaction with PAM through hydrogen and covalent bondings. The...
متن کاملMorphology of Electrospun Nylon-6 Nanofibers as a Function of Molecular Weight and Processing Parameters
In the present study, the morphology and mechanical properties of nylon-6 nanofibers were investigated as a function of molecular weight (30,000, 50,000, and 63,000 g/mol) and electrospinning process conditions (solution concentration, voltage, tip-to-collector distance, and flow rate). Scanning electron micrographs (SEM) of nylon-6 nanofibers showed that the diameter of the electrospun fiber i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer
سال: 2007
ISSN: 0032-3861
DOI: 10.1016/j.polymer.2007.03.032