Bipolar resistive switching on Ti/TiO2/NiCr memory cells
نویسندگان
چکیده
منابع مشابه
Investigating bipolar resistive switching characteristics in filament type and interface type BON-based resistive switching memory
Available online 17 September 2012
متن کاملSelf-Compliant Bipolar Resistive Switching in SiN-Based Resistive Switching Memory
Here, we present evidence of self-compliant and self-rectifying bipolar resistive switching behavior in Ni/SiNx/n⁺ Si and Ni/SiNx/n++ Si resistive-switching random access memory devices. The Ni/SiNx/n++ Si device's Si bottom electrode had a higher dopant concentration (As ion > 1019 cm-3) than the Ni/SiNx/n⁺ Si device; both unipolar and bipolar resistive switching behaviors were observed for th...
متن کاملBipolar resistive switching of chromium oxide for resistive random access memory
This study investigates the resistance switching characteristics of Cr2O3-based resistance random access memory (RRAM) with Pt/Cr2O3/TiN and Pt/Cr2O3/Pt structures. Only devices with Pt/Cr2O3/TiN structure exhibit bipolar switching behavior after the forming process because TiN was able to work as an effective oxygen reservoir but Pt was not. Oxygen migration between Cr2O3 and TiN was observed ...
متن کاملStochastic model of the resistive switching mechanism in bipolar resistive random access memory: Monte Carlo simulations
A stochastic model of the resistive switching mechanism in bipolar metal-oxide-based resistive random access memory RRAM is presented. The distribution of electron occupation probabilities obtained is in good agreement with previous work. In particular, it is shown that a low occupation region is formed near the cathode. Our simulations of the temperature dependence of the electron occupation p...
متن کاملDegenerate Resistive Switching and Ultrahigh Density Storage in Resistive Memory
We show that, in tantalum oxide resistive memories, activation power provides a multi-level variable for information storage that can be set and read separately from the resistance. These two state variables (resistance and activation power) can be precisely controlled in two steps: (1) the possible activation power states are selected by partially reducing resistance, then (2) a subsequent par...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Superficies y Vacío
سال: 2017
ISSN: 1665-3521
DOI: 10.47566/2017_syv30_1-040065