Bipolar anodization enables the fabrication of controlled arrays of TiO2 nanotube gradients
نویسندگان
چکیده
منابع مشابه
In Situ Anodization of WO3-Decorated TiO2 Nanotube Arrays for Efficient Mercury Removal
WO₃-decorated TiO₂ nanotube arrays were successfully synthesized using an in situ anodization method in ethylene glycol electrolyte with dissolved H₂O₂ and ammonium fluoride in amounts ranging from 0 to 0.5 wt %. Anodization was carried out at a voltage of 40 V for a duration of 60 min. By using the less stable tungsten as the cathode material instead of the conventionally used platinum electro...
متن کاملFabrication of Ni-Ti-O nanotube arrays by anodization of NiTi alloy and their potential applications
Nickel-titanium-oxide (Ni-Ti-O) nanotube arrays (NTAs) prepared on nearly equiatomic NiTi alloy shall have broad application potential such as for energy storage and biomedicine, but their precise structure control is a great challenge because of the high content of alloying element of Ni, a non-valve metal that cannot form a compact electronic insulating passive layer when anodized. In the pre...
متن کاملTiO2 nanotube arrays fabricated by anodization in different electrolytes for biosensing
Titania nanotube arrays were fabricated by anodic oxidation of titanium foil in different electrolytes. The morphology, crystallinity and composition of the as-prepared nanotube arrays were studied by XRD, SEM and EDX. Electrochemical impedance spectroscopy (EIS) was employed to investigate their electrical conductivity and capacitance. Titania nanotube arrays co-adsorbed with horseradish perox...
متن کاملFreestanding TiO2 Nanotube Arrays with Ultrahigh Aspect Ratio via Electrochemical Anodization
Self-organized, freestanding titania (TiO2) membrane with ultrahigh aspect ratio of the length/diameter (∼1500) was fabricated via electrochemical anodization of highly pure titanium (Ti) foil in fluorinecontaining ethylene glycol, followed by a simple and safe detachment of the formed TiO2 membrane from the metallic Ti substrate. The resulting membrane consists of highly ordered, vertically al...
متن کاملControlled fabrication of porous double-walled TiO2 nanotubes via ultraviolet-assisted anodization.
Double-walled TiO2 nanotubes with porous wall morphologies are fabricated by anodization under ultraviolet (UV) irradiation. TiO2 formed by anodization of Ti is activated to generate electrons and holes by UV and the anodization process is influenced by the photo-generated charges. As a consequence, morphologies of the fabricated TiO2 nanotubes can be adjusted by controlling the UV illumination...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: J. Mater. Chem. A
سال: 2014
ISSN: 2050-7488,2050-7496
DOI: 10.1039/c4ta04247f