Biomechanical comparison of four treatment models for the totally edentulous maxilla: a finite element analysis

نویسندگان

چکیده

The aim of this study is to evaluate by finite element analysis different techniques totally edentulous maxilla rehabilitation, considering implants, bone tissue, metallic infra-structure, and prosthetic abutments characteristics, means a three-dimensional model. Stress distribution on was analyzed with four configurations (six implants axially installed, all-on-four technique, M-4 conventional two zygomatic implants). Greater tension tissue were found around distal in all treatment groups, but not exceeding resistance limits cortical bone. Von Mises stress higher the region techniques. Higher concentration seen angled implants. highest values minimal compression stresses concentrated peri implant-bone especially model All-on-4. Therefore, present revealed that implants) for are feasible safe, from biomechanical point view.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A finite element analysis of tilted versus nontilted implant configurations in the edentulous maxilla.

The aim of this study was to evaluate stress patterns at the bone-implant interface of tilted versus nontilted implant configurations in edentulous maxillae using finite element models of two tilted and one nontilted configuration. Analysis predicted the maximum absolute value of principal compressive stress near the cervical area of the distal implant for all models. The tilted configurations ...

متن کامل

Biomechanical Evaluation and Comparison of the Artificial and Natural Skin Properties Using Finite Element Method

Introduction: The self-repair process cannot occur in the skin lesions, therefore, skin replacements are used due to the formation of a scar, which resulted in the complete loss of skin. Artificial skin should have the same specifications as the natural skin. The finite element methods were used in this study to evaluate the biomechanichal properties of natural and artificial skins. Materials ...

متن کامل

a time-series analysis of the demand for life insurance in iran

با توجه به تجزیه و تحلیل داده ها ما دریافتیم که سطح درامد و تعداد نمایندگیها باتقاضای بیمه عمر رابطه مستقیم دارند و نرخ بهره و بار تکفل با تقاضای بیمه عمر رابطه عکس دارند

the comparison of stress distribution with different implant numbers and inclination angles in all-on-four and conventional methods in maxilla: a finite element analysis

background and aims. all-on-four technique involves the use of tilted implants to allow for shorter cantilevers. this finite element analysis aimed at investigating the amount and distribution of stress in maxillary bone surrounding the implants with all-on-four vs. frequently used method with six implants technique using different numbers and inclination angles. materials and methods. a 3d ede...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Research, Society and Development

سال: 2022

ISSN: ['2525-3409']

DOI: https://doi.org/10.33448/rsd-v11i10.32509