Biomass solid oxide fuel cell using solid weed waste as fuel
نویسندگان
چکیده
منابع مشابه
Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant
In this study, effect of energy price on the development of a biomass gasification-solid oxide fuel cell-gas turbine hybrid power plant has been considered. Although, these hybrid systems have been studied based on sustainable approaches, economic aspects, specifically conventional energy prices, which are the principal bottleneck for the development of these new power generators, have attracte...
متن کاملPerformance of Ceria-electrolyte Solid Oxide Fuel Cell Using Simulated Biogas Mixtures as Fuel
In this study, a samarium cerium electrolyte-supported solid oxide fuel cell (SOFC) was assembled with Ce0.8Sm0.2O2−δ (SDC) electrolyte, La0.58Sr0.4Fe0.8Co0.2O3-δ (LSCF) as cathode and WNi-Ce as anode. A porous layer of SDC between anode and electrolyte was used to improve adhesion of the anode ink. The cell performance was investigated with hydrogen and three simulated biogas mixtures (CH4/CO2...
متن کاملAn octane-fueled solid oxide fuel cell.
There are substantial barriers to the introduction of hydrogen fuel cells for transportation, including the high cost of fuel-cell systems, the current lack of a hydrogen infrastructure, and the relatively low fuel efficiency when using hydrogen produced from hydrocarbons. Here, we describe a solid oxide fuel cell that combines a catalyst layer with a conventional anode, allowing internal refor...
متن کاملIntegrating Multiple Solid Oxide Fuel Cell Modules
Abstract-According to SECA program guidelines, solid oxide fuel cells (SOFC) will be produced in the form of 3–10 kW modules for residential use. In addition to residential use, these modules can also be used in apartment buildings, hospitals, etc., where a higher power rating would be required. For example, a hospital might require a 250 kW power supply. To provide this power using the SOFC mo...
متن کاملDevelopment of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell
The bare and pre-oxidized AISI 430 pieces were screen printed by copper ferrite spinel coatings. Good bonding between the coating and the substrate was achieved by the reactive sintering process of the reduced coating. The energy dispersive X-ray spectroscopy (EDS) analysis revealed that the scale is a double layer consisting of a chromia-rich subscale and an outer Cu/Fe-rich spinel. The result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electrochimica Acta
سال: 2021
ISSN: 0013-4686
DOI: 10.1016/j.electacta.2021.138681