Biogas Reforming over Al-Co Catalyst Prepared by Solution Combustion Synthesis Method
نویسندگان
چکیده
The results of carbon dioxide reforming CH4 (model biogas) on catalysts prepared by solution combustion synthesis (SCS) and impregnation moisture capacity methods are presented. Investigation the activity synthesized from initial mixtures Co(NO3)2-Al(NO3)3-urea different compositions was carried out for production synthesis-gas, SCS traditional incipient wetness catalyst preparation were compared. methane conversion reached 100%, CO2 increased to 86.2%, while yield H2 CO 99.2% 85.4%, respectively, at 900 °C. It found that CoAl2O4 spinel formation due substitution Al3+ with Co2+ cations. Consequently, lattice parameters increased, since ionic radius (0.51 Å) less than Cο2+ (0.72 Å). Advantages in comparison method dry shown. aim this work is develop a new model biogas into gas, which will contribute organization environmentally friendly, energy-saving future.
منابع مشابه
Cu0.15Ce0.85O2-y Mixed Oxide Catalyst Prepared by Co-precipitation Synthesis
The use of CeO2 and CeO2-containing materials as a component of heterogeneous industrial catalysts or as a support for transition metals is based on superior chemical and physical stability, high oxygen mobility and high oxygen vacancy concentrations, which are characteristic for the fluorite-type oxides (economically and technologically most important application is the use of ceria in the thr...
متن کاملReforming of Biogas over Co- and Cu-Promoted Ni/Al2O3-ZrO2 Nanocatalysts Synthesized via Sequential Impregnation Method
Utilization of active and stable catalyst could have enormous advantages in industrial application of biogas reforming. In order to achieve this goal, the effects of Cu and Co as promoters were investigated over physical-chemical properties of Ni/Al2O3-ZrO2 catalyst in reforming of biogas. The sequential impregnation was used for preparation of catalysts. The catalysts were characterized using ...
متن کاملAmmonia synthesis over Co-Mo alloy nanoparticle catalyst prepared via sodium naphthalenide-driven reduction.
We report the synthesis of Co-Mo alloy nanoparticles with a uniform distribution of the alloy elements on CeO2via sodium naphthalenide-driven reduction. The resulting sample functions as a highly efficient and stable catalyst for ammonia synthesis. Based on the metal weight, the catalytic activity is ca. 20 times higher than that of Co3Mo3N.
متن کاملMethane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method
An alumina-supported nickel catalyst was prepared by impregnation of Ni2+ solution onto mesoporous alumina under microwave irradiation (denoted as M-Ni/Al2O3). For comparison, a catalyst with the same nickel content was prepared by conventional impregnation method (denoted as UM-Ni/Al2O3). Both M-Ni/Al2O3 and UM-Ni/Al2O3 catalysts were applied to the syngas (H2 + CO) production by methane oxy-s...
متن کاملLow-temperature CO oxidation over Cu/Pt co-doped ZrO2 nanoparticles synthesized by solution combustion
Zirconia (ZrO2) nanoparticles co-doped with Cu and Pt were applied as catalysts for carbon monoxide (CO) oxidation. These materials were prepared through solution combustion in order to obtain highly active and stable catalytic nanomaterials. This method allows Pt2+ and Cu2+ ions to dissolve into the ZrO2 lattice and thus creates oxygen vacancies due to lattice distortion and charge imbalance. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Catalysts
سال: 2021
ISSN: ['2073-4344']
DOI: https://doi.org/10.3390/catal11020274