Biodiesel Production from Bioremediation of Palm Oil Mill Effluent via Oleaginous Fungi

Electrocoagulation of Palm Oil Mill Effluent

Electrocoagulation (EC) is an electrochemical technique which has been employed in the treatment of various kinds of wastewater. In this work the potential use of EC for the treatment of palm oil mill effluent (POME) was investigated. In a laboratory scale, POME from a factory site in Chumporn Province (Thailand) was subjected to EC using aluminum as electrodes and sodium chloride as supporting...

Isolation of Lipase Producing Fungi from Palm Oil Mill Effluent (POME) Dump Sites at Nsukka

In this study, twelve fungal lipase producing strains belonging to Aspergillus, Penicillium, Trichoderma and Mucor genera were isolated from palm oil mill effluent composts. The Aspergillus spp. were more frequent (42%) and was present in all the samples assayed. Mucor sp. was the least encountered (8.3%).The lipase producing profile showed that Trichoderma (8.07-8.24 u/mL) and Aspergillus (6.2...

Getting Lipids for Biodiesel Production from Oleaginous Fungi

Production of Biogas from Palm Oil Mill Effluent at Pilot Scale: Effect of Recycle Sludge

An anaerobic digestion of palm oil mill effluent (POME) for production of biogas was carried out at pilot scale under thermophilic condition. The objective of this research is to maintain short hydraulic retention time (HRT) and high degradation of the POME to biogas by applying recycle sludge. Fresh POME from PTPN IV without further treatment was used as feed. The fermentation process occurred...

A Review of Palm Oil Mill Effluent (Pome) Water Treatment

Palm oil is one of the two most important vegetable oils in the world’s oil and fats market. The extraction and purification processes generate different kinds of waste generally known as palm oil mill effluent (POME). The environmental impact of POME cannot be over emphasized; hence the need for treatment measures to reduce these impacts before discharge. Therefore, this paper reviews the proc...