Biodegradability of Nanoparticle Modified Fiber Reinforced Polyester Resin Nanocomposite
نویسندگان
چکیده
منابع مشابه
Chemical characterisation of the fracture surfaces of polyester resin and a polyester based nanocomposite
A novel in situ fracture stage has been used to conduct micro compact tension (micro-CT) tests within the preparation chamber of a time-of-flight secondary-ion mass spectrometry (ToF-SIMS) instrument. Tests have been undertaken in the usual ultra high vacuum (UHV) conditions and in an ambient air atmosphere for comparison. A plain polyester resin system has been compared to an organically modif...
متن کاملNanoparticle-reinforced resin-based dental composites.
OBJECTIVE TiO(2) nanoparticles treated with the organosilane allyltriethoxysilane (ATES) are used to improve the mechanical properties of dental resin-based composites (RBCs, Z100, 3M ESPE). METHODS TiO(2) nanoparticles were sonically dispersed in an ethanol solution containing ATES. The modified particles were washed in pure ethanol and dried before being used as filler. Fourier transform in...
متن کاملEffect of fiber surface treatments on the fiber-matrix interaction in banana fiber reinforced polyester composites
Cellulosic bers have been used as cost-cutting llers in plastic industry. Among the various factors, the nal performance of the composite materials depends to a large extent on the adhesion between the polymer matrix and the reinforcement and therefore on the quality of the interface. To achieve optimum performance of the end product, suf cient interaction between the matrix resin and th...
متن کاملCyanate Ester Resin Modified with Nano-particles for Inclusion in Continuous Fiber Reinforced Composites
Executive Summary 1 Chapter 1: Introduction 4 Chapter 2: Bisphenol E Cyanate Ester/Multiwalled Carbon Nanotubes 8
متن کاملUsage of Fiber-Reinforced Resin Instruments in Interproximal Surfaces
OBJECTIVES The aim of this study was to investigate the effects of fiber-reinforced resin burs on the surface roughness of a nanofilled composite. METHODS Average surface roughness values (Ra, mum) were measured using a surface profilometer and surface textures after finishing procedures were evaluated using a scanning electron microscope (SEM). Thirty cylindrical specimens were prepared usin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2013
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2013.12.203