Binders for pressed products based on phosphogypsum waste
نویسندگان
چکیده
The article is devoted to the issues of obtaining pressed building materials based on dihydrate phosphogypsum. Dihydrate phosphogypsum after mechanical activation in a ball mill acquires ability harden specimens. After and its pressing at pressure 30 MPa, strength specimens increases by 6...8 times compared non-activated reaches 25...30 MPa. There found influence various chemical admixtures binding properties activated there are shown possibilities water resistance improvement increasing other characterizing this material. studied an effect aggregates technical artificial stone made peculiarities structure change under different factors.
منابع مشابه
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولTreatment of phosphogypsum waste using suitable organic extractants
Phosphogypsum (PG) is a residue of the phosphate fertilizer industry that has relatively high concentrations of harmful radioactive materials. The reduction in concentration of the radionuclides from PG was investigated. The removal process is based on leaching of radionuclides using suitable organic extractants. The studied radionuclides were 226Ra, 210Pb, 238U and 40K. The factors affect the ...
متن کاملBinders for radioactive waste forms made from pretreated calcined sodium bearing waste
Radioactive waste generated during the reprocessing of fuel rods by the U.S. Department of Energy (DOE) is stored in underground tanks at Hanford, Savannah River and INEEL. The liquid fraction commonly referred to as sodium bearing waste (SBW), is a highly alkaline solution containing large amounts of sodium hydroxide, sodium nitrate and sodium nitrite. It has been shown that SBW can be mixed w...
متن کاملMineral Carbonation of Phosphogypsum Waste for Production of Useful Carbonate and Sulfate Salts
Phosphogypsum (CaSO4·2H2O, PG) waste is produced in large amounts during phosphoric acid (H3PO4) production. Minor quantities are utilized in construction or agriculture, while most of the material is stockpiled, creating an environmental challenge to prevent pollution of natural waters. In principle, the gypsum waste could be used to capture several hundred megatonnes of carbon dioxide (CO2). ...
متن کاملFirst insight into microbial community composition in a phosphogypsum waste heap soil.
The aim of this study was to investigate the soil microbial communities of a phosphogypsum waste heap. The soil microbial community structures can differ over time, as they are affected by the changing environmental conditions caused by a long-term exposure to different kinds of pollutions, like is the case of soil in the post-production waste area in Wiślinka (in the northern part of Poland) c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Zaštita materijala
سال: 2022
ISSN: ['0351-9465', '2466-2585']
DOI: https://doi.org/10.5937/zasmat2204437d