Binder Jetting: A Novel NdFeB Bonded Magnet Fabrication Process
نویسندگان
چکیده
منابع مشابه
An Exploration of Binder Jetting of Copper
The ability to fabricate geometrically complex copper shapes via Additive Manufacturing (AM) could have a significant impact on the design and performance of thermal management systems and structural electronics. In this research a Binder Jetting AM process (ExOne R2) was used to fabricate green parts made of high purity copper powder. Once printed, the green part was sintered under a reducing ...
متن کاملA new structure of Nd1+εFe4BB4 phase in NdFeB magnet
Sintered NdFeB magnets are relatively complex multiphase systems containing Nd2Fe14B matrix and about 15% of other intermetallics such as Nd1+εFe4BB4, Nd-oxides (Nd-rich phase), etc. Boron rich Nd1+εFe4B4 B forms in irregularly distributed heavily faulted grains of roughly the same size as those of the Nd2Fe14B phase [1]. The Curie temperature of this phase is 13K and, therefore, it is not ferr...
متن کاملBig Area Additive Manufacturing of High Performance Bonded NdFeB Magnets
Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing (BAAM) - to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical prop...
متن کاملAdditive Manufacturing of Casting Tools Using Powder- Binder-Jetting Technology
This chapter presents the use of the additive manufacturing (AM) method powderbinder-jetting (PBJ) for the generation of molds and cores for casting applications. Theoretical information on process steps and the binding of particles is given. For the based chemistry, examples are presented and the transfer from conventional produc‐ tion processes to powder-binder-jetting is explained. For sand ...
متن کاملPowder Alignment System for Anisotropic Bonded NdFeB Halbach Cylinders
A Halbach cylinder, fabricated from pre-magnetized sintered NdFeB magnet segments, is proposed for the powder aligning system during the compression or injection moulding of anisotropic bonded Halbach oriented NdFeB ring magnets. The influence of leading design parameters of the powder aligning system, viz. the number of magnet segments per pole, their axial length and radial thickness, and the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 2016
ISSN: 1047-4838,1543-1851
DOI: 10.1007/s11837-016-1883-4