Binder-Free Ge-Co-P Anode Material for Lithium-Ion and Sodium-Ion Batteries
نویسندگان
چکیده
Nanostructure composites Ge-Co-P with brutto-composition CoGe2P0.1, or CoGe2@GeP were manufactured via electrolysis of aqueous electrolyte. Such are able to reversible insertion lithium and sodium specific capacities up 855 425 mAh/g, respectively. The main advantage the consists in their excellent cycleability.
منابع مشابه
Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملAnode for Sodium-Ion Batteries
DOI: 10.1002/aenm.201500174 The continuous pulverization of alloy anodes during repeated sodiation/desodiation cycles is the major reason for the faster capacity decay. However, if these elements can form a compound (such as Sn 4 P 3 ) after each Na extraction, the pulverization of these elements can be partially repaired and the accumulation of pulverization can be terminated. Therefore, we ca...
متن کاملA binder-free Ge-nanoparticle anode assembled on multiwalled carbon nanotube networks for Li-ion batteries.
Germanium (Ge) nanoparticle-multiwalled carbon nanotube (MWCNT) anodes are fabricated through the anchoring of Ge on the surface of electrophoretically pre-deposited MWCNT networks via a thermal evaporation process. This Ge-MWCNT nanocomposite displays a large reversible capacity of over 800 mA h g(-1) at 1 C even after 200 cycles.
متن کاملDefective Ti2Nb10O27.1: an advanced anode material for lithium-ion batteries.
To explore anode materials with large capacities and high rate performances for the lithium-ion batteries of electric vehicles, defective Ti2Nb10O27.1 has been prepared through a facile solid-state reaction in argon. X-ray diffractions combined with Rietveld refinements indicate that Ti2Nb10O27.1 has the same crystal structure with stoichiometric Ti2Nb10O29 (Wadsley-Roth shear structure with A2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Batteries
سال: 2022
ISSN: ['2313-0105']
DOI: https://doi.org/10.3390/batteries8080098