Billet Straightening by Three-Point Bending and Its Automation
نویسندگان
چکیده
منابع مشابه
An Investigation on the Causes of a Rotor Bending and its Thermal Straightening (TECHNICAL NOTE)
Distortion or bend in a turbine rotor (especially HIP rotors) may be caused by a number of factors, either singularly or in combination. In general, the causes of rotor bend can be classified invariably in two categories: Rapidly forming permanent rotor bends and/or Slower forming rotor bends, which could trip the turbines’ emergency stop. One of the major modifying solutions for rapid repairin...
متن کاملCrackling noise in three-point bending of heterogeneous materials.
We study the crackling noise emerging during single crack propagation in a specimen under three-point bending conditions. Computer simulations are carried out in the framework of a discrete element model where the specimen is discretized in terms of convex polygons and cohesive elements are represented by beams. Computer simulations revealed that fracture proceeds in bursts whose size and waiti...
متن کاملFlexural Properties and Fracture Behavior of Nanoporous Alumina film by Three-Point Bending Test
This study investigated the influence of porosity on the flexural property of a nanoporous alumina film. When the porosity of the alumina film increased, both bending strength and modulus declined. The results from the bending test revealed that the setting of the film during the bending test had significant influence on the flexural property. Fracture only occurred when the porous side of the ...
متن کاملthe american dream in three plays by eugene oneill, tennessee williams, and lorraine hansberry
این مطالعه به نقد و بررسی مفهوم اسطوره ی رویای امریکایی در سه نمایشنامه ی قرن بیستم امریکایی می پردازد، که این نمایشنامه ها عبارتند از: the iceman cometh (مرد یخین می آید) نوشته ی یوجین اونیل، 1940؛ desirea streetcar named (اتوبوسی به نام هوس) نوشته ی تنسی ویلیامز، 1947؛ و in the sun raisin a (انگور خشکیده در آفتاب) ، نوشته ی لورین هنزبری، 1958. هدف از این بررسی، ابتدا شناخت مفهوم رویای امری...
15 صفحه اولElastic modulus of a triple-stranded stainless steel arch wire via three- and four-point bending.
The modulus of elasticity (E) was determined in simple three- and four-point bending for an 0.0175" (3 X 0.008") stainless steel arch wire. Using variable light loads (10-160 g) to limit the elastic deflection of a wire to less than 5% of its beam length, the force-deflection profiles were determined for three nominal span lengths (L = 0.35", 0.75", and 1.00") in three-point bending and three n...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma14010090