Bending test of stiffened aluminum-alloy plates by impulsive water pressure.

Finite element analysis of stiffened plates

The paper presents the development of a new plate/shell stiffener element and the subsequent application in determine frequencies, mode shapes and buckling loads of different stiffened panels. In structural modelling, the plate and the stiffener are treated as separate finite elements where the displacement compatibility transformation takes into account the torsion – flexural coupling in the s...

On Bending of Elastic Plates*

Local Behavior of Discretely Stiffened Composite Plates and Cylindrical Shells

The Layerwise Shell Theory is used to model discretely stiffened laminated composite plates and cylindrical shells for stress, vibration, pre-buckling and post-buckling analyses. The layerwise theory reduces a 3-D problem to a 2-D problem by expanding the 3-D displacement field as a function of a surface-wise 2-D displacement field and a 1-D interpolation polynomial through the shell thickness....

Buckling strength of uniaxially compressed orthogonally stiffened plates

The bucking strength calculation includes the determination of global buckling strength, the effective plate width and the torsional buckling strength of open section stiffeners. In each calculation the classic strength formula should be modified considering the effect of initial imperfections and residual welding stresses. The calculation method of Det Norske Veritas design rules and the Euroc...

Anodic aluminum oxide microchannel plates

A new material for microchannel plates (MCP) is proposed — anodic aluminum oxide. Microchannel plates made of this material may be much cheaper than with conventional lead glass MCP. Also a significantly smaller channel diameter (up to 70 nm) is easily achievable, which means better spatial resolution and the possibility to operate in strong magnetic fields. Methods and means are developed for ...