Bending, Shear and Patch Loading Interaction Behaviour of Slender Steel Sections
نویسندگان
چکیده
منابع مشابه
Mechanical behaviour of TWIP steel under shear loading
Twinning induced plasticity steels (TWIP) are very good candidate for automotive industry applications because they potentially offer large energy absorption before failure due to their exceptional strain hardening capability and high strength. However, their behaviour is drastically influenced by the loading conditions. In this work, the mechanical behaviour of a TWIP steel sheet sample was in...
متن کاملA Proposed Method to Evaluate Ultimate Resistance of Plate Girders Subjected to Shear and Patch Loading (RESEARCH NOTE)
Experimental investigation of the ultimate resistance of slender, steel-plate girder web panels to combined shear-and-patch loading indicates significant interaction between shear loading and patch loading. However, an existing interaction formula is based on experimental results. Herein, an improved design procedure for slender plate girders subjected to combined shear and patch loading is pro...
متن کاملAssessment of different methods for fatigue life prediction of steel in rotating bending and axial loading
Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...
متن کاملBending Fatigue Tests and Finite Element Models of Steel Rectangular Hollow Sections [SRHS]
The Welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). A lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. In order to establish the fatigu...
متن کاملbending fatigue tests and finite element models of steel rectangular hollow sections [srhs]
the welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). a lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. in order to establish the fatigu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2016
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2016.08.287