Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
نویسندگان
چکیده
منابع مشابه
Behaviour of Plate Anchorage in Plate-Reinforced Composite Coupling Beams
As a new alternative design, plate-reinforced composite (PRC) coupling beam achieves enhanced strength and ductility by embedding a vertical steel plate into a conventionally reinforced concrete (RC) coupling beam. Based on a nonlinear finite element model developed in the authors' previous study, a parametric study presented in this paper has been carried out to investigate the influence of se...
متن کاملSystem Effects Influencing the Bending Strength of Timber Beams
A stochastic model of hierarchical series system type for the bending strength of spruce beams is defined from the anticipation that the bending failure takes place at a cross-section with a defect cluster formed by knots or grain irregularities. The parameters of the model are estimated from measurements of the strengths of a large number of short test pieces cut from the beams such that judge...
متن کاملShear Strength of Lightly Reinforced T-Beams in Negative Bending
Nine restrained T-beams were tested in a study of the negative moment region shear strength of lightly reinforced concrete T-beams. Variables included the longitudinal reinforcement ratio p, (0.47 percent and 0. 70 percent) and the nominal stirrup strength (0 to 84 psi [0 to 0.60 MPa]). The test results are compared with the shear provisions of "Building Code Requirements for Reinforced Concret...
متن کاملExperimental Investigations into the Collapse of Simple and Reinforced Thin-Walled Channel Beams under Bending Loads
In this paper, collapse behavior of simple and reinforced thin-walled channel- section beams, subjected to three- point bending, is investigated. Many simple channel- section beams of different geometry and some reinforced ones were tested, and their strengths after collapse were obtained thoroughly. Since the available theories in this area are complicated and little attention has been paid to...
متن کاملBiaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach
In this research, the buckling and bending behaviour of smart nanocomposite plate reinforced by single- walled carbon nanotubes (SWCNTs) under electro-magneto-mechanical loadings is studied. The extended mixture rule approach is used to determine the elastic properties of nanocomposite plate. Equilibrium equations of smart nanocomposite plate are derived using the Hamilton’s principle based on ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strength of Materials
سال: 2017
ISSN: 0039-2316,1573-9325
DOI: 10.1007/s11223-017-9836-x