Bending Fatigue Test on Force Fitted Large Specimens
نویسندگان
چکیده
منابع مشابه
Experimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...
متن کاملThe Impact of the Steel Cord Construction on Its Decline of Breaking Force after Fatigue Test in Bidirectional Bending Conditions
M. Suliga, R. Kruzel, Czestochowa University of Technology, Czestochowa, Poland In the paper the influence of bidirectional bending on breaking force of steel cord has been assessed. Tests were carried out under laboratory conditions on three types of cord. It was found that bidirectional bending of steel cord cause the deterioration of strength properties and weakening of steel cord as a resul...
متن کاملA Stress Analysis of Bending Fatigue Specimens Using the Finite Element Method
A numerical analysis of stresses generated in bending fatigue specimens has been performed employing the commercially available FEM-program ADINA. The results show that transverse bending occurs, giving rise to a stress enhancement in the edge region. A stress maximum is obtained approximately 2 mm away from the specimen edge. This result is consistent with the fact that fatigue initiation pred...
متن کاملBending Fatigue Failures of Compressor Valve Reeds
Bending fatigue failures OI cantilever type suction valve reeds occurred under operating conditions in a semi-hermetic refrigerant compressor during field trials. The finite element method (FEM) was applied to predict both the static and dynamic displacements and the resultant stresses of the reeds. The dynamic stresses in the location of the fracture exceeded the fatigue limit of the reed stee...
متن کاملBending fatigue of hybrid composite rods
The flexural fatigue behavior of hybrid composite rods comprised of unidirectional carbon and glass fibers was investigated. Damage was evaluated by monitoring stiffness loss as a function of cycles, and bending fatigue failure was defined in terms of strength retention. The acoustic emission technique and microscopic examination were used to characterize damage progression and failure mechanis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Zosen Kiokai
سال: 1960
ISSN: 1884-2062
DOI: 10.2534/jjasnaoe1952.1960.107_331