منابع مشابه
Transparent conductive graphene textile fibers
Transparent and flexible electrodes are widely used on a variety of substrates such as plastics and glass. Yet, to date, transparent electrodes on a textile substrate have not been explored. The exceptional electrical, mechanical and optical properties of monolayer graphene make it highly attractive as a transparent electrode for applications in wearable electronics. Here, we report the transfe...
متن کاملBending Fatigue Failures of Compressor Valve Reeds
Bending fatigue failures OI cantilever type suction valve reeds occurred under operating conditions in a semi-hermetic refrigerant compressor during field trials. The finite element method (FEM) was applied to predict both the static and dynamic displacements and the resultant stresses of the reeds. The dynamic stresses in the location of the fracture exceeded the fatigue limit of the reed stee...
متن کاملBending fatigue of hybrid composite rods
The flexural fatigue behavior of hybrid composite rods comprised of unidirectional carbon and glass fibers was investigated. Damage was evaluated by monitoring stiffness loss as a function of cycles, and bending fatigue failure was defined in terms of strength retention. The acoustic emission technique and microscopic examination were used to characterize damage progression and failure mechanis...
متن کاملFibers for Textile - Based Electrical Energy Storage
This research will demonstrate feasibility for manufacturing fiber-based ceramic capacitors suitable for electrical energy storage within multifunctional textile products. Capacitive energy storage is well matched to applications requiring high specific power, long cycle life, and high reliability. We are using a simple chemical scheme for preparing fiber-based capacitors by coating electricall...
متن کاملHollow antiresonant fibers with low bending loss.
We first use numerical simulations to show that bending losses of hollow antiresonant fibers are a strong function of their geometrical structure. We then demonstrate this by fabricating a hollow antiresonant fiber which presents a bending loss as low as 0.25 dB/turn at a wavelength of 3.35 μm and a bend radius of 2.5 cm. This fiber has a relatively low attenuation (<200 dB/km) over 600 nm mid-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Textile Machinery Society of Japan
سال: 1963
ISSN: 0040-5043,1881-1159
DOI: 10.4188/jte1955.9.7