Bend-resistant leaky multi-trench fiber with large mode area and single-mode operation
نویسندگان
چکیده
منابع مشابه
Trench-Assisted All-Solid Large-Mode-Area Fiber for Robust Single-Mode Operation
In this talk, we discuss all-solid and easily realizable trench-assisted fibers that show tremendous potential for addressing challenges faced by current fiber designs for power scaling. OCIS codes: (000.0000) General; (000.0000) General [8-pt. type. For codes, see www.opticsinfobase.org/submit/ocis.]
متن کاملExperimental demonstration of single-mode large mode area multi-trench fiber for UV-VIS light transmission
Step-index optical fibers are widely used waveguides for light transmission. However, non-linear effects are always a severe challenge for optical fibers with increasing power level. This challenge is more severe at shorter wavelengths, where core size has to be much smaller in order to maintain a single mode operation. For an example, for 0.005 core refractive index with respect to cladding, a...
متن کاملExtending single mode performance of all-solid large-mode-area single trench fiber.
We report a novel "single trench fiber" design for mode area scaling of the fundamental mode while offering effective single mode operation for a compact fiber laser device. This fiber design allows very high suppression of the higher order modes by offering high loss and power delocalization. It has the advantages of low cost and easy fabrication thanks to all solid fiber design, cylindrical s...
متن کاملLarge-mode-area leaky optical fiber fabricated by MCVD.
A large-mode-area single-mode optical fiber based on leaky-mode filtering was prepared by a modified chemical vapor deposition (MCVD) technique. The fiber has a leaky cladding that discriminates the fundamental mode from higher-order modes. A preliminary version has a 25 μm core diameter and 0.11 numerical aperture. A Gaussian-like mode with 22 μm mode field diameter was observed after 3 m prop...
متن کاملBending performance of large mode area multi-trench fibers.
Bending performance of the Multi-trench Fibers (MTFs) has been investigated using the Finite Element Method. Numerical investigations show that MTFs can provide low-loss effective single mode operation under bent configuration, thanks to the resonant coupling of the Higher order Modes (HOMs). Large ratio between the HOMs and the Fundamental Mode (FM) losses can be ensured, although the ratio dr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PLOS ONE
سال: 2018
ISSN: 1932-6203
DOI: 10.1371/journal.pone.0203047