Benchmarking Silicon FinFET With the Carbon Nanotube and 2D-FETs for Advanced Node CMOS Logic Application
نویسندگان
چکیده
In this article, the performance of silicon FinFET is compared with carbon nanotube (CNT-FET) and 2-D field-effect transistors (2D-FETs) for upcoming node CMOS logic application. Based on experimental results, a 17-stage ring oscillator (RO) circuit implemented using compact models to analyze stage-delay energy-delay performances. A tightly positioned 20- 10-nm channel-length-based CNT-FET enhances I ON also increases leakage currents significantly. Due poor electrostatic control increased gate leakage, 2D-FET provide lowered limited ac performance. Thus, targeting an off-state current, delivers more than three times higher drive as well five better performances in comparison 2D-FET. On other hand, scaled organic FETs are yet far away compare technology. Hence, silicon-based (3-D) leading all devices (2-D, 1-D, 0-D) scaling next-generation
منابع مشابه
CIRCUIT APPLICATIONS OF CARBON NANOTUBE FETs
Carbon Nanotube FETs (CNFETs) are showing significant promise in nanoelectronics. They are one of the principle areas of research that are seen as having the capability of replacing MOSFET transistors. In fact, their performance is much better than MOSFETs below 10nm [1], with the operation frequencies of CNFET devices being up to1000 times greater. This project investigates various properties ...
متن کاملA model for carbon nanotube FETs in the ballistic limit
As know, a ballistic MOS-Like carbon nanotube FET can be simulated by using a self-consistent procedure between the charge and the Poisson equations. Because of the integral form of the charge equation, this model cannot be implemented in the commercially available circuit simulators, such as SPICE. In this paper, we propose an analytical solution for estimating the charge equation, so that the...
متن کاملCMOS-based carbon nanotube pass-transistor logic integrated circuits
Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for integrated circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based integrated circuits based ...
متن کاملCarbon Nanotube Integration with a CMOS Process
This work shows the integration of a sensor based on carbon nanotubes using CMOS technology. A chip sensor (CS) was designed and manufactured using a 0.30 μm CMOS process, leaving a free window on the passivation layer that allowed the deposition of SWCNTs over the electrodes. We successfully investigated with the CS the effect of humidity and temperature on the electrical transport properties ...
متن کاملINTEGRATED ELECTROCHEMICAL GATING OF CARBON NANOTUBE FETs FOR BIOSENSING APPLICATIONS
Carbon nanotubes have emerged as the leading candidate of electronic materials used for future nanoscale chemical and molecular sensors. Recently, nanotube field effect transistors (CNFETs) have been exploited as biodetectors of the thyroid hormone, triiodothyronine (T3). Although significant progress has been towards the development of actual nanotube based sensor devices, the next challenge i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Electron Devices
سال: 2021
ISSN: ['0018-9383', '1557-9646']
DOI: https://doi.org/10.1109/ted.2021.3081076