Behaviour of Li in Li-Al alloys - NRA and SIMS studies.
نویسندگان
چکیده
منابع مشابه
Zener Relaxation in Al-Li Binary Alloys
Internal friction (I.F.) and modulus measurements have been carried out as a function of temperature in order to study the Li mobility in an A1 8.1 at% Li 0.03 at% Zr alloy. The results show that the sequence of 6' and 6 precipitation can be followed through the evolution of the internal friction spectra. Two peaks appear in the internal friction spectrum. The low temperature peak Pz (450 K), h...
متن کاملDECOMPOSITION IN BINARY Al-Li ALLOYS
We have investigated the influence of aging on the morphology and phase composition of annealed Al-Li binary alloys by means of an atom probe with a multi-detection system. The influence of artifacts such as the preferential evaporation of the Li-atoms and the pile-up effects for the Al-atoms were analysed as well. Specimens of Al 2.0 wt%Li andAl -2.9 wt%Li were solution treated and aged at 190...
متن کاملCASTABILITY OF Al-Li-Mg AND Al-Li-Cu-Mg ALLOYS
The objective of the present work is to study the casting characteristics of various A1-Li alloys, which include fluidity and strengths of the alloys and their interaction with cast molds. Materials investigated are Al-Li-Mg and Al-Li-Cu-Mg alloys with Li content of 2.5 wt%. The results show that sand molds with resin binders are good for A1-Li casting. Ceramic coatings can further reduce the m...
متن کاملPhase decomposition and reversion in Al-Li alloys
After overview on the behaviour of first order order/disorder phase transformation based on the instability diagrams, the results of in-situ SR-SAS measurements have been reported in order to clarify the process of transformation, the growth mechanism of metastable Llz phase and its coarsening as well as the reversion process in Al-Li alloys. The results were compared with computer simulation b...
متن کاملMICROSTRUCURE AND STRENGTHENING OF Al-Li-Cu-Mg ALLOYS
A detailed quantitative model for the strengthening of monolithic alloys and composites due to precipitation strengthening, solution strengthening, grain and subgrain strengthening, strengthening by dislocations and load transfer to ceramic inclusions is presented. The model includes a newly derived description of the effect of a precipitate free zone (PFZ) around the reinforcing phase incorpor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 1985
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.28.308