Behaviour of fibre-based polymer concrete subjected to ambient and heat curing
نویسندگان
چکیده
منابع مشابه
Mechanical Behaviour of Geopolymer Concrete under Ambient Curing
Utilisation of fly ash and Ground Granulated Blast Slag as an alternative material in concrete reduces the use of OPC in concrete. Evolution of geopolymer concrete cured at ambient temperature broadens its suitability and applicability to concrete based structures. This paper presents the mix proportions and outcome of an experimental study on the density and compressive strength of geopolymer ...
متن کاملFlexural Behavior of Polyester Polymer Concrete Subjected to Different Chemicals
Polymer concrete (PC) is a composite material prepared by resin and aggregates. Advantages of polymer concretes include rapid curing at ambient temperatures, high flexural and compressive strengths, excellent chemical resistance and low permeability. In this research, a comparative study was performed on degradation of polyester resin concrete in different chemical solutions. Polymer concrete s...
متن کاملBehaviour of fibre reinforced concrete slabs
This paper presents a comparison of the properties of concrete slabs when two types of fibres are added. One specimen had no fibres and acted as a control specimen. The remaining four specimens had steel and polypropylene fibres added in the volumetric ratio of 0.5% and 1.0%. The dimensions of the slab specimens were 820×820×80 mm and were supported by four rollers at their edges. A displacemen...
متن کاملA Study on Behaviour of Normal Strength Concrete and High Strength Concrete Subjected to Elevated Temperatures
Cement concrete is a complex mixture of different materials. Behaviour of concrete depends on its mix proportions and constituents when it is subjected to elevated temperatures. Principal effects due to elevated temperatures are loss in compressive strength, loss in weight or mass, change in colour and spall of concrete. The experimental results of normal concrete and high strength concrete sub...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materiali in tehnologije
سال: 2020
ISSN: 1580-2949,1580-3414
DOI: 10.17222/mit.2019.143