Behaviour of Batter Micropiles Subjected to Vertical and Lateral Loading Conditions

The Behaviour of Rollover Protective Structures subjected to Static and Dynamic Loading Conditions

Centrifuge modelling of long piles subjected to lateral loading with high load eccentricity in sand

In this research paper, five centrifuge lateral loading tests of long piles with a considerable load eccentricity were carried out in the sand to investigate the impacts of the load eccentricity and pile length changes on the lateral behavior of a flexible pile beside the determination of experimental p-y curves. Comparing experimental test results with the recommended API (American Petroleum ...

Buckling Behavior of Semi-scale Steel Tank with Carbon Fiber Reinforced Polymer Ring Subjected to Lateral Uniform Pressure Loading

Research on increasing the buckling strength of tanks carrying fluid and also cylindrical shells of thin-walled steel in civil engineering and mechanics is important. This is due to the widespread use of these structures in the industry. Due to the low thickness of the body and also due to the pressure forces entering these tanks, these structures are exposed to lateral buckling. In this resear...

A Simple Approach to Static Analysis of Tall Buildings with a Combined Tube-in-tube and Outrigger-belt Truss System Subjected to Lateral Loading

In this paper, an efficient technique is presented for static analysis of tall buildings with combined tube-in-tube and outrigger-belt truss system while considering shear lag effects. In the process of replacing the discrete structure with an elastically equivalent continuous one, the structure is modeled as two parallel cantilevered flexural-shear beams that are constrained at the outrigger-b...

Enhancement Factors for the Vertical Response of Footbridges Subjected to Stochastic Crowd Loading

Publisher's statement This is the author’s version of a work that was accepted for publication in Computers & Structures. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A defi...