Behaviour of Anode Impurities in Copper Electrorefining.
نویسندگان
چکیده
منابع مشابه
Anode Slime Gained During Electrolysis Process of Secondary Copper Anodes
The aim of this research is to get a better understanding of the electrolytic refining process in order to yield the anode slime. Three types of secondary copper anodes are electro refined in an electrolytic system, where the electrolyte is an acid of copper sulphate solution. As a result of the electro-refining process the anode slime has been gained as secondary product. The experimental ...
متن کاملCopper Refinement from Anode to Cathode and then to Wire Rod: Effects of Impurities on Recrystallization Kinetics and Wire Ductility.
In this paper, the traceability of copper from the anode to the cathode and then the wire rod has been studied in terms of impurity content, microstructure, texture, recrystallization kinetics, and ductility. These characterizations were obtained based on secondary ion mass spectrometry, differential scanning calorimetry (DSC), X-ray diffraction, HV hardness, and electron backscattered diffract...
متن کاملcharacterization of copper anode slimes from bicc
anode slimes are a by-product of the electrolytic copper refining process, which contain the precious and other important metals .in order to find a suitable method for treating these materials it is necessary to know their phase composition. for the separation of various phases from the complexmixture of copper anode. slime, the slime is leached in various steps and the residues of each step a...
متن کاملComparison Nanostructure Behaviour of Copper Species on the Silicamatrix Xerogels
The incorporation of copper species is synthesized in a silica matrix by the sol-gel method. We have doped copper ions and copper particles using two different copper sources: Cu(NO3)2.3H2O and copper particles chemically synthesized. We can prepare the particles of copper metallic, cuprous and cupric oxide and compare the synthesis and characterization copper species on the silica matrix. O...
متن کاملCopper anode corrosion affects power generation in microbial fuel cells
Non-corrosive, carbon-based materials are usually used as anodes in microbial fuel cells (MFCs). In some cases, however, metals have been used that can corrode (e.g. copper) or that are corrosion resistant (e.g. stainless steel, SS). Corrosion could increase current through galvanic (abiotic) current production or by increasing exposed surface area, or decrease current due to generation of toxi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shigen-to-Sozai
سال: 1991
ISSN: 0916-1740,1880-6244
DOI: 10.2473/shigentosozai.107.569