Behavior of Strengthened Composite Prestressed Concrete Girders under Static and Repeated Loading

Analysis of Concrete Bridge Girders Strengthened with Cfrp Laminates under Service and Extreme Loading Conditions

Externally bonded carbon fiber reinforced polymer (CFRP) laminates are a feasible and economical alternative to traditional methods for strengthening and stiffening deficient reinforced concrete and prestressed concrete girders as shown in Fig. (1). Although extensive research has already been undertaken to investigate the behavior of CFRP strengthened bridge girders, the majority of work condu...

Analysis of Concrete Bridge Girders Strengthened with Frp Laminates under Service and Extreme Loading Conditions

The project is a continuation from fiscal year 2004-2005. Previous work aimed at developing new analytical tools for analysis of RC beams strengthened with FRP laminates. The models were used to analyze several test specimens of RC beams and to investigate the corresponding failure mode, and whether it is due to CFRP fracture, debonding, or concrete crushing. Current work focused on using the e...

Performance of Self-consolidating Concrete in Prestressed Girders

Effects of Temperature Variations on Precast, Prestressed Concrete Bridge Girders

The monitoring of a precast, prestressed girder bridge during fabrication and service provided the opportunity to observe temperature variations and to evaluate the accuracy of calculated strains and cambers. The use of high curing temperatures during fabrication affects the level of prestress because the strand length is fixed during the heating, the coefficients of thermal expansion of steel ...

Behaviour of FRP strengthened concrete columns under eccentric compression loading

This paper presents results of testing eccentrically loaded columns externally wrapped with two types of materials. Six cylindrical (205 mm diameter and 925 mm height) plain columns were cast and tested. Half of the columns were wrapped with GFRP and the other half with CFRP. All columns were tested by applying an axial load at 50 mm eccentricity. In each group (GFRP or CFRP wrapped) of columns...