Behavior of ring footing resting on reinforced sand subjected to eccentric-inclined loading
نویسندگان
چکیده
منابع مشابه
strip footing behavior on reinforced sand with void subjected to repeated loading
this paper describes a series of laboratory model tests on strip footings supported on unreinforced and geogrid-reinforced sand with an inside void. the footing is subjected to a combination of static and cyclic loading. the influence of various parameters including the embedment depth of the void, the number of reinforcement layers, and the amplitude of cyclic load were studied. the results sh...
متن کاملNumerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading
Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...
متن کاملBuckling Behavior of Semi-scale Steel Tank with Carbon Fiber Reinforced Polymer Ring Subjected to Lateral Uniform Pressure Loading
Research on increasing the buckling strength of tanks carrying fluid and also cylindrical shells of thin-walled steel in civil engineering and mechanics is important. This is due to the widespread use of these structures in the industry. Due to the low thickness of the body and also due to the pressure forces entering these tanks, these structures are exposed to lateral buckling. In this resear...
متن کاملStudy of bearing capacity of strip footing resting on reinforced sand
This research was performed to investigate the behavior of strip footing on geosynthetic reinforced sandy soil and to study the effect of different parameters contributing to their performance using laboratory model tests. The parameters investigated in the study included top layer spacing (u), width of reinforcement (b), vertical spacing between layers (s) and number of reinforcement layers (N...
متن کاملBearing capacity of shell strip footing on reinforced sand
In this paper, the ultimate load capacities of shell foundations on unreinforced and reinforced sand were determined by laboratory model tests. A series of loading tests were carried out on model shell footing with and without single layer of reinforcement. The tests were done for shell foundation at different shell embedment depth and subgrade density. The results were compared with those for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Rock Mechanics and Geotechnical Engineering
سال: 2018
ISSN: 1674-7755
DOI: 10.1016/j.jrmge.2017.11.005