Behavior of Hybrid Engineered Cementitious Composites Containing Nanocellulose
نویسندگان
چکیده
Abstract Nanocellulose (NC) is a promising reinforcing material for cementitious composites, but its effect on the mechanical properties of hybrid engineered composites (ECCs) has not been studied. In this paper, we investigated polyethylene (PE)-steel fibre ECC reinforced with NC and dosages ranging from 0.1% to 0.4% compressive strength ECC. The optimum quantity best property was determined. Enhancement observed all mixes compared reference mix, mix containing 0.2% showed maximum improvement.
منابع مشابه
Hygral Behavior of Engineered Cementitious Composites (ECC)
In this paper, the sorption isotherm and the hygral deformation of a tensile strain-hardening fiber reinforced engineered cementitious composite (ECC) is described using a physical model. The influence of using a low alkali content Portland cement on the physical mechanisms of drying shrinkage is discussed. From a durability point of view the crack width of a material as a result of restrained ...
متن کاملEngineered Cementitious Composites
This paper overviews Engineered Cementitious Composites (ECC) as an emerging construction material. Emphasis is placed on the accumulated knowledge on durability, safety, and sustainability of reinforced ECC (R/ECC) structures, recognizing that the concrete of the future must meet these characteristics. In light of recent and future full-scale field applications of ECC, the limited studies on l...
متن کاملHeaded Anchor/Engineered Cementitious Composites (ECC) Pullout Behavior
In this paper, the inelastic damage process in Engineered Cementitious Composites (ECC) in the high stress concentration zone adjacent to the head of an embedded anchor under tensile load was examined experimentally and numerically. An FEM model together with a tensile strain-hardening material model of ECC was developed to simulate the damage process leading to final failure. Experimental obse...
متن کاملGeneral Design Assumptions for Engineered Cementitious Composites
The use of Engineered Cementitious Composites (ECC) for structural design requires a number of assumptions of the material, some of which can be drastically different from those suitable for normal concrete and tension-softening fiber reinforced concrete. This contribution focuses on design assumptions of the constitutive models of ECC in tension and compression. Specifically, while the tensile...
متن کاملEngineered Cementitious Composites (ecc) – Tailored Composites through Micromechanical Modeling
This article provides a brief overview of several classes of fiber reinforced cement based composites and suggests future directions in FRC development. Special focus is placed on micromechanics based design methodology of strain-hardening cement based composites. As example, a particular engineered cementitious composite newly developed at the ACE-MRL at the University of Michigan is described...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lecture notes in civil engineering
سال: 2023
ISSN: ['2366-2565', '2366-2557']
DOI: https://doi.org/10.1007/978-981-99-3330-3_6