Bed symmetry in the fountain confined conical spouted beds with open-sided draft tubes

نویسندگان

چکیده

Bed symmetry has been analysed in fountain confined conical spouted beds operating with fine particles. Thus, vertical particle velocities and the spout shape have determined a wide range of spouting air bed configurations. is widely accepted without draft tubes or nonporous ones, but this not case when open-sided are used. radial velocity profiles differ depending on cross-sectional angular plane considered tubes. The expands preferentially along tube opened surface, wider as aperture ratio increased. literature correlations proposed for average diameter no one valid estimating parameter whole configurations these systems

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Applicability of the spouting regime for drying of biomass wastes in conical spouted beds with a draft tube

The operating conditions in spouted bed regime of uniform beds consisting of different biomass wastes dry and wet have been studied to determine the applicability of conical spouted beds with a draft tube in the drying of biomass wastes. This experimental study has been carried out at room temperature and the effect of the solid humidity on the stability of beds of biomass wastes has been deter...

متن کامل

Hydrodynamics And Heat Transfer Characteristics Of Draft Tube Spouted Bed Roasting Of Groundnuts (Arachis Hypogeae)

The hydrodynamic characteristics of flow regime were studied employing different draft tubes during the spouted bed roasting of groundnuts and the dimensionless parameters were employed for predicting the flow regime. The estimated Reynolds's number (Re) under the turbulent convection regime was ≈ 8399. The size of the draft tubes employed ranged from 0.175 to 0.375 m length and 0.065 m diamete...

متن کامل

Study of Pressure Drop in the 2D Spouted Bed with Conical Base of Binary Particle Mixtures: Effects of Particle Size and Density

In this study, the pressure drop for the binary mixtures of particles differing in size and density in a pseudo-2D spouted bed was experimentally studied. A binary mixture of solid particles including sand, Gypsum, and polyurethane was used in the experimental setup. Effects of static bed height, cone angle, particles diameter, and a particles weight fraction on the bed pressure drop were e...

متن کامل

Intermittent Drying of Beans in a Spouted Bed

Carioca beans are a highly nutritious grain, in terms of the amount of protein, iron and potassium as well as carbohydrates and fiber and as a source of vitamins. The moisture content of recently picked beans is too high for good preservation and storage, resulting in the need for drying before packaging. In this work, the drying of Carioca beans in a laboratory scale spouted bed under intermit...

متن کامل

The Effect of Interparticle Cohesive Forces on the Fluid Flow Simulation in Spout-fluid Beds

As reflected in the literature, solid-fluid flow characteristics in spouted beds can vary widely when particles are coated by a suspension. This work is aimed at describing the effect of interparticle forces on airflow distribution in conical spouted beds of inert particles coated by Eucalyptus black liquor. The simulator developed earlier is modified to incorporate this effect. Two corrective ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Powder Technology

سال: 2022

ISSN: ['0032-5910', '1873-328X']

DOI: https://doi.org/10.1016/j.powtec.2021.11.055