Bearing strength of constructions of building and building with steel framework at high temperature influences
نویسندگان
چکیده
منابع مشابه
Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...
متن کاملinvestigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. there are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective.in this research, tw...
متن کاملOPTIMAL PERFORMANCE-BASED SEISMIC DESIGN OF COMPOSITE BUILDING FRAMES WITH RC COLUMNS AND STEEL BEAMS
Composite RCS building frames integrate reinforced concrete columns with structural steel beams to provide an efficient solution for the design and construction of earthquake-resisting structures. In this paper, an optimization framework is developed for performance-based seismic design of planar RCS moment resisting frames. The objective functions are defined as minimizing the construction cos...
متن کاملBuilding Optical Constructions with Minimum Complexity
It is often claimed that future systems will necessarily be all-optical, because electronic devices are not fast enough to keep up with the increase in fiber capacity. However, two objections are commonly raised: first, optical systems need many basic optical components, which are typically very expensive; and second, optical systems need many switch reconfigurations, which are typically very s...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction, materials science, mechanical engineering
سال: 2018
ISSN: 2415-7031
DOI: 10.30838/p.cmm.2415.250918.305.170