Bearing Capacity Prediction of Mine Hauling Road Using Cone Penetration Testing (CPT)

Using Miniature Cone Penetration Test (Mini-CPT) to determine engineering properties of sandy soils

In-situ testing techniques have proven to be successful in improving the speed and reliability of geotechnical investigations. One of the most common in-situ methods in engineering geology and site investigation is Cone Penetration Test (CPT), which is mainly used for characterization of soils, as it is a robust, simple, fast, reliable and economic test that can provide continuous soundings of ...

Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data

In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, &#10failure zone and plunging failure of p...

Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data

In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, failure zone and plunging failure of pil...

Guide to Cone Penetration Testing

Instruments and Methods Cone penetration testing (CPT) in Antarctic firn: an introduction to interpretation

Commercial cone penetration testing (CPT) equipment was adapted to allow penetrative testing in hard polar firn to depths of 10m. The apparatus is hydraulically driven, rate-controllable and able to penetrate firn with a resistance of 10MPa. It can be mounted on many types of typical polar vehicles, requiring connection to only hydraulics and 12V electricity. Data recorded include both cone tip...