Bearing Capacity of Strip Footing on Anisotropic and Nonhomogeneous Clays
نویسندگان
چکیده
منابع مشابه
Bearing capacity of shell strip footing on reinforced sand
In this paper, the ultimate load capacities of shell foundations on unreinforced and reinforced sand were determined by laboratory model tests. A series of loading tests were carried out on model shell footing with and without single layer of reinforcement. The tests were done for shell foundation at different shell embedment depth and subgrade density. The results were compared with those for ...
متن کاملStudy of bearing capacity of strip footing resting on reinforced sand
This research was performed to investigate the behavior of strip footing on geosynthetic reinforced sandy soil and to study the effect of different parameters contributing to their performance using laboratory model tests. The parameters investigated in the study included top layer spacing (u), width of reinforcement (b), vertical spacing between layers (s) and number of reinforcement layers (N...
متن کاملSeismic Bearing Capacity of Strip Footings on Pile-Stabilized Slopes
This paper develops an analytical method to calculate seismic bearing capacity of a strip footing, which is located on a slope reinforced with rows of pile. The resistance of passive pile is determined based on normal and shear stress of the soil around the pile, which is then compared to other analytical methods. This comparison indicates an acceptable agreement. The variants of the study incl...
متن کاملEffect of confinement pressure on bearing capacity of two samples of square and strip footing (numerical study)
This paper presents the results of modeling tests of the Effect of Confinement Pressure on footing bearing capacity of two kinds of square and strip footing. Footings bearing capacity depends upon many factors including soil kind, depth, form and kind of loading. Soil behavior is variable regarding the kind of loading and the kind of deformations in that can have great importance in the amount ...
متن کاملStatic and Dynamic Bearing Tests on a Strip Footing in Saturated
This report describes the static and dynamic loading of a 12-inch-wide by 18-inch-deep by 6-foot-long rigid footing, representing the strip footing of a subsurface shelter. Boundary conditions simulated those of a torsionally restrained footing of a flexible arch structure with simulated overburden of 20 feet at one side of the footing. Saturated and partially saturated sand was the test soil. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Soils and Foundations
سال: 1981
ISSN: 0038-0806
DOI: 10.3208/sandf1972.21.1