Bearing capacity of piles in a reinforced by pressure cementation soil massif
نویسندگان
چکیده
Studies of the piles bearing capacity after strengthening soil by cement mortar pressure injection were carried out to determine pile foundations increasing patterns in a result soils cementation. Depending from volume and technological parameters, stress state around changes, additional pile-soil compression occurs friction along lateral surface increase, as well resistance under bottom end. Cementation effect on for different injectors location number foundation determined tests. The research results can be used reinforcement design conditions reconstruction with loads foundations.
منابع مشابه
Soil Improvement By Microbiological Cementation
Beginning of the twentieth century, population growth, urbanization and industrialization has led to depletion of rapidly building areas. Accordingly, each passing day, the opening of the new construction sites has become mandatory. Among these newly opened areas, geotechnical aspects of construction from time to time in areas not suitable for construction and deployment was seen to improve the...
متن کاملComparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data
In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, failure zone and plunging failure of pil...
متن کاملEvaluating the Soil Bearing Capacity Coefficients by Means of a Finite Element Program Based on Elasto - Plastic Mohr - Coulomb Behavior
A finite element program based on elastic –plastic model of Mohr-Coulomb criterion was used to evaluate the bearing capacity coefficients of soil under shallow strip flexible footing . The results were compared with others’ analytical results and it was found that the present study could offer quite consistent and rather precise values for the bearing capacity coefficients . The effect of d...
متن کاملEvaluating the Soil Bearing Capacity Coefficients by Means of a Finite Element Program Based on Elasto - Plastic Mohr - Coulomb Behavior
A finite element program based on elastic –plastic model of Mohr-Coulomb criterion was used to evaluate the bearing capacity coefficients of soil under shallow strip flexible footing . The results were compared with others’ analytical results and it was found that the present study could offer quite consistent and rather precise values for the bearing capacity coefficients . 

The effect ...
متن کاملComparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data
In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, 
failure zone and plunging failure of p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202127403023