Beamline for a light ion fusion demonstration reactor
نویسندگان
چکیده
منابع مشابه
UWFDM-1076 Three-Dimensional Neutronics Analysis for the LIBRA-SP Light Ion Fusion Power Reactor
Three-dimensional (3-D) neutron-gamma transport calculations have been performed for the LIBRA-SP chamber with detailed geometrical modeling and results were compared to results based on one-dimensional (1-D) calculations. The overall tritium breeding ratio is 1.396. This is only 3% lower than the value predicted from the 1D results. The overall reactor energy multiplication is 1.157 which is o...
متن کاملUWFDM-1014 Nuclear Analysis for the Light Ion Fusion Power Reactor LIBRA-SP
A 1.2 m thick zone of blanket tubes is needed for the LIBRA-SP chamber wall to be a lifetime component. The roof should be located at 17 m from the target to be a lifetime component. The depth of the LiPb pool should be 0.6 m for the bottom plate to be a lifetime component. The required biological shield thickness is 2.5 m on the side and 2.6 m at the top. The overall TBR is 1.435 and the overa...
متن کاملUWFDM-1023 Environmental and Safety Assessment of LIBRA-SP: A Light Ion Fusion Power Reactor Design
LIBRA-SP is a 1000 MWe light ion beam power reactor design study. The reactor structure is made of a low activation ferritic steel and uses LiPb as a breeder. The total activities in the blanket and reflector at shutdown are 721 MCi and 924 MCi, respectively. Hands-on maintenance is impossible anywhere inside the reactor chamber. The biological dose rates near the diode are too high at all time...
متن کاملElectronuclear Ion Fusion in an Ion Cyclotron Resonance Reactor Inventor
OF THE DISCLOSURE .
متن کاملHeavy ion driven reactor-size double shell inertial fusion targets
Inertial Confinement Fusion (ICF) is considered as an alternative to Magnetic Confinement Fusion to achieve controlled thermonuclear fusion. The main goal is to exploit the energy released from thermonuclear fusion reactions to produce electric energy. Heavy ion beams were proposed in 1976 as one of the possible drivers in ICF. The method consists in igniting few milligrams of deuterium-tritium...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Laser and Particle Beams
سال: 1984
ISSN: 0263-0346,1469-803X
DOI: 10.1017/s0263034600000628