Beam - RF Cavity Stability with Feedback Control in a Circular Accelerator
نویسندگان
چکیده
منابع مشابه
SLAC-PUB-562 March 1971 BEAM - RF CAVITY STABILITY WITH FEEDBACK CONTROL IN A CIRCULAR ACCELERATOR*
The stability of a beam in an RF accelerating cavity in a storage ring or circular accelerator has been studied by K. Robinsonl* 2 and many others. Robinson has found that under certain assumptions the beam-RF system with no feedback control is stable against “center-of-charge” oscillations if the cavity resonance frequency, wo, lies in restricted ranges. In particular, if ~0 is less than the R...
متن کاملControl Theory for RF Feedback and Longitudinal Beam Stability
Progress in digital hardware solutions such as field programmable gate arrays (FPGA) has raised the question of how to design the algorithms of RF feedback. This especially applies to the feedback of the RF cavities and the longitudinal beam feedback for SIS100. For example, FPGAs currently allow FIR (finite impulse response) filter lengths of several tens of taps. This number of degrees of fre...
متن کاملElectron cloud effects on beam evolution in a circular accelerator
081002-1 The interaction between a low-density electron cloud in a circular particle accelerator with a circulating charged particle beam is considered. The particle beam’s space charge attracts the cloud, enhancing the cloud density near the beam axis. It is shown that this enhanced charge and the image charges associated with the cloud charge and the conducting wall of the accelerator may hav...
متن کاملRobinson-type Criteria for Beam and Rf Cavity with Delayed, Voltage-proportional Feedback
We generalize the Robinson stability criteria, for a charged particle beam interacting with the radio-frequency cavity resonator that is responsible for accelerating it, to the case that the resonator is equipped with a delayed voltageproportional feedback.
متن کاملRf Cavity Bpm's as Beam Angle and Beam Correlation Monitors*
It has been shown that high performance cavity BPM's are capable of accurate beam trajectory angle and beam ‘tilt’, (x-z or y-z correlation) measurements [1],[2]. Such a device will be very useful for the optimization of a variety of beamlines, such as high current linacs, bunch rotators and storage rings. The signal from a non-axial trajectory or a tilted beam is in quadrature to that observed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 1971
ISSN: 0018-9499
DOI: 10.1109/tns.1971.4326286