Beam profile monitoring at the test beam line at the Compact Linear Collider test facility
نویسندگان
چکیده
منابع مشابه
First Beam Tests of the Muon Collider Target Test Beam Line at the Ags
In this report we will describe the muon collider target test beam line which operates off one branch of the AGS switchyard. The muon collider target test facility is designed to allow a prototype muon collider target system to be developed and studied. The beam requirements for the facility are ambitious but feasible. The system is designed to accept bunched beams of intensities up to 1.6x10 2...
متن کاملLinear Collider Test Facility: Twiss Parameter Analysis at the Ip/post-ip Location of the Atf2 Beam Line *
At the first stage of the ATF2 beam tuning, vertical beam size is usually bigger than 3!m at the IP. Beam waist measurements using wire scanners and a laser wire are usually performed to check the initial matching of the beam through to the IP. These measurements are described in this paper for the optics currently used ("x=4cm and "y=1mm). Software implemented in the control room to automate t...
متن کاملBeam Based Alignment at the Kek Accelerator Test Facility
The KEK Accelerator Test Facility (ATF) damping ring is a prototype low emittance source for the NLC/JLC linear collider. To achieve the goal normalized vertical emittance γεy = 20 nm-rad, magnet placement accuracy better than 30 μm must be achieved. Accurate beam-based alignment (BBA) is required. The ATF arc optics uses a FOBO cell with two horizontally focusing quadrupoles, two sextupoles an...
متن کاملPolarized Positrons at a Future Linear Collider and the Final Focus Test Beam
Having both the positron and electron beams polarized in a future linear e+e−collider is a decisive improvement for many physics studies at such a machine. The motivation for polarized positrons, and a demonstration experiment for the undulator-based production of polarized positrons are reviewed. This experiment (‘E-166’) uses the 50 GeV Final Focus Test electron beam at SLAC with a 1 m-long h...
متن کاملExpanded Studies of Linear Collider Final Focus Systems at the Final Focus Test Beam
In order to meet their luminosity goals, linear colliders operating in the center-of-mass energy range from 350 to 1,500 GeV will need to deliver beams which are as small as a few nanometers tall, with x:y aspect ratios as large as 100. The Final Focus Test Beam (FFTB) is a prototype for the final focus demanded by these colliders: its purpose is to provide demagnifications equivalent to those ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review Special Topics - Accelerators and Beams
سال: 2013
ISSN: 1098-4402
DOI: 10.1103/physrevstab.16.082802