Beam monitor detectors for medical applications
نویسندگان
چکیده
منابع مشابه
Beam Halo Monitor Using Diamond Detectors for Xfel/spring-8
We have been developing an electron beam halo monitor as an interlock device for protection of undulator permanent magnets against radiation damage. When permanent magnets are irradiated with a halo part of 8GeV electron beam, magnetic fields undulators are degraded permanently and laser oscillation is weakened. Therefore, the interlock device is required during machine operation. Diamond detec...
متن کاملDiamonds as timing detectors for MIPS: The HADES proton-beam monitor and start detectors
Diamond detectors are well known for their radiation hardness and high drift speeds of both electron and holes making them ideal as start detectors placed in the beam. However, due to the large effective energy needed to create electron hole pairs (13 eV) the charge created by minimum ionizing particles (MIPS) traversing the diamond is marginal (8000 pairs for a 300 μm thick diamond) [1]. In th...
متن کاملBeam Intensity Profile Monitor
This paper describes an intercepting beam intenSity profile and position monitor which was developed at SLAC. It has excellent spatial resolution as well as signal efficiency. The instrument utilizes the electromagnetic cascade shower emission effect. Net charge leakage signals comparable in magnitude to the intercepted beam current are easily obtainable. The latest model of the instrument is d...
متن کاملBeam Position Monitor Development for the Usr*
Capacitive pick-ups for closed-orbit measurements are presently under development for an Ultra-low energy Storage Ring (USR) at the future Facility for Low-energy Antiproton and Ion Research (FLAIR). Low-intensity, low-energy antiprotons impose challenging demands on the sensitivity of the monitoring system. The nondestructive beam position monitors (BPMs) should be able to measure about 10 par...
متن کاملDiamond Detectors as Beam Monitors
CVD diamond particle detectors are already in use in the CERN experiments ATLAS, CMS, LHCb and ALICE and at various particle accelerator laboratories in USA and Japan. This is a proven technology with high radiation tolerance and very fast signal read-out [1]. It can be used for measuring single-particles as well as for high-intensity particle cascades, for timing measurements on the nanosecond...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Reports of Practical Oncology & Radiotherapy
سال: 2014
ISSN: 1507-1367
DOI: 10.1016/j.rpor.2014.04.014