Beam extraction experiment with field-emission arrays
نویسندگان
چکیده
منابع مشابه
Fabrication of TaS2 nanobelt arrays and their enhanced field-emission.
Crystal TaS2 nanobelt arrays were fabricated on Ta wafers by a two-step method. Field-emission measurements show that the nanobelt arrays are decent field emitters with a turn-on field of approximately 0.7 V microm(-1), a threshold field of approximately 2.1 V microm(-1), and a field enhancement factor of approximately 4.33 x 10(4).
متن کاملSynthesis and field emission properties of different ZnO nanostructure arrays
In this article, zinc oxide (ZnO) nanostructures of different shapes were fabricated on silicon substrate. Well-aligned and long ZnO nanowire (NW) arrays, as well as leaf-like ZnO nanostructures (which consist of modulated and single-phase structures), were fabricated by a chemical vapor deposition (CVD) method without the assistance of a catalyst. On the other hand, needle-like ZnO NW arrays w...
متن کاملField emission from non-uniform carbon nanotube arrays
Regular arrays of carbon nanotubes (CNTs) are frequently used in studies on field emission. However, non-uniformities are always present like dispersions in height, radius, and position. In this report, we describe the effect of these non-uniformities in the overall emission current by simulation. We show that non-uniform arrays can be modeled as a perfect array multiplied by a factor that is a...
متن کاملSilicon MOSFET / Field Emission Arrays Fabricated Using CMP
We report the integration of a MOSFET with a field emission arrays to obtain low voltage switching and more stable emission in field emission devices. Instead of the traditional feedback resistor stabilization in the emitter circuit, a MOSFET is used as a voltage controlled current source thereby stabilizing the emission current and resulting in low voltage switching. In this device, the emitte...
متن کاملField Emission Properties and Fabrication of CdS Nanotube Arrays
A large area arrays (ca. 40 cm(2)) of CdS nanotube on silicon wafer are successfully fabricated by the method of layer-by-layer deposition cycle. The wall thicknesses of CdS nanotubes are tuned by controlling the times of layer-by-layer deposition cycle. The field emission (FE) properties of CdS nanotube arrays are investigated for the first time. The arrays of CdS nanotube with thin wall exhib...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
سال: 1996
ISSN: 0168-9002
DOI: 10.1016/0168-9002(95)01253-2