BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys
نویسندگان
چکیده
منابع مشابه
Strengthening Mechanisms in the Aged 2024 and 7075 Aluminium Alloys
Aluminum 2024 and 7075 alloys which are widely used in aerospace and marine applications were chosen to investigate their strengthening mechanisms. Using differential thermal analysis (DIA), metallography and tension tests, the best solutionizing conditions were determined to be 500±5°C and 2 hours for 2024 and 480?±5°C and 1 hour for 7075 alloy. Aging was performed in the range of 100 to 200°C...
متن کاملThe BCC/B2 Morphologies in AlxNiCoFeCr High-Entropy Alloys
The present work investigates primarily the morphology evolution of the body-centeredcubic (BCC)/B2 phases in AlxNiCoFeCr high-entropy alloys (HEAs) with increasing Al content, which has been neglected so far. There exist two types of microscopic morphologies of BCC and B2 phases in this HEA series: one is the weave-like morphology induced by the spinodal decomposition, and the other is the mic...
متن کاملFractal-like behaviour of the BCC/FCC phase separation in the iron-gold alloys.
Iron-gold alloys with compositions Fe(70)Au(30) and Fe(50)Au(50) were prepared by arc melting. The alloys were investigated by means of the high-resolution scanning electron microscopy (SEM-FEG) in the as-cast state and upon annealing in two steps, i.e. at 250 degrees C for 24 h and subsequently at 500 degrees C for 48 h. The alloys were composed of two phases, i.e. a BCC phase rich in iron and...
متن کاملOn Sluggish Diffusion in Fcc Al–Co–Cr–Fe–Ni High-Entropy Alloys: An Experimental and Numerical Study
High-throughput measurement using the numerical inverse method combined with the diffusion multiple technique was employed to determine the composition-dependent interdiffusion coefficients in fcc Al–Co–Cr–Fe–Ni high-entropy alloys at 1273, 1323, and 1373 K. The reliability of the obtained interdiffusion coefficients was confirmed by comparing the model-predicted composition/interdiffusion flux...
متن کاملMulticomponent and High Entropy Alloys
This paper describes some underlying principles of multicomponent and high entropy alloys, and gives some examples of these materials. Different types of multicomponent alloy and different methods of accessing multicomponent phase space are discussed. The alloys were manufactured by conventional and high speed solidification techniques, and their macroscopic, microscopic and nanoscale structure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Materialia
سال: 2018
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2018.07.031