Bauschinger effects and work-hardening in spheroidized steels

Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests

Recent Bauschinger-type tests conducted on a twinning-induced plasticity (TWIP) steel highlights the important contribution of internal stresses to work hardening [1]. Along this line we present Bauschinger experiments in a Fe-22Mn wt.%-0.6C wt.% TWIP steel. The mechanical behaviour upon load reversal shows transient and permanent softening effects. Determination of the internal stress from the...

Secondary Hardening in High Speed Steels

Duplex Hardening of Steels for Aeroengine Bearings

Duplex hardening is a process in which conventional heat-treatments such as secondary or case hardening are followed up by surface nitriding to achieve exceptional properties, particularly in the context of aeroengine bearings. Hardness values in excess of 1 000 HV can in principle be achieved, and although the hardness decreases as a function of depth below the surface, some level of enhanceme...

in translation: translators on their work and what it means

کتاب در باب ترجمه، اثر استر آلن و سوزان برنوفسکی منتشر شده در ماه می 2013 توسط نشریه کلمبیا است. نویسندگان در این کتاب به بررسی 18 مترجم با در نظر گرفتن نقش آثاری که این مترجمان ترجمه کرده اند میپردازند. کتاب به دو بخش تقسیم میشود: " مترجم در جهان" و " کار مترجم" این دو بخش مقالات همیشگی ترجمه و موقعیت خاص ادبیات بیگانه در جهان وسیع امروزی را مورد خطاب قرار میدهد. در این کتاب مقالات متعددی از ن...

Experimental Investigations on Heat Treatment of Cold Work Tool Steels: Part 1, Air-hardening Grade (d2)

The present experimental investigations deal with the improvement of mechanical properties of cold work tool steels through different heat treatment processes. An attempt was made to get optimal combination of hardness and toughness through changes of microstructure by heat treatment. The toughness of D2 tool steel increases with tempering temperature. The hardness of D2 tool steel decreases wi...