Batch Electrocoagulation Process for Removal of Chromium from Tannery Wastewater

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Continuous removal of chromium from tannery wastewater using activated sludge process—Determination of kinetic parameters

The activated sludge has been acclimatized with chromium (VI) ions from 5 mg/L to 20 mg/L. It is observed that the chromium removal percentage, COD removal and mixed liquor suspended solid (MLSS) decrease with the increase in dilution rate. Maximum food to microorganisms ratio (F/M) is found to be 0.19. When initial metal ion concentration increases from 5 mg/L to 20 mg/L, the chromium removal ...

متن کامل

Removal of Chromium (VI) in Tannery Wastewater by Bacillus cereus

Bacillus cereus was used to remove Cr(VI) in tannery wastewater containing medium at different initial Cr(VI) concentration, temperature, pH and biomass to get better conditions. At the optimum condition, the Cr(VI) in tannery wastewater was treated by each component of the cells to detect the capacity of the components for the Cr(VI) reduction. Also, the Bacillus cereus was continuous cultured...

متن کامل

Removal of Hexavalent Chromium from Electroplating Wastewater by Electrocoagulation with Iron Electrodes

The performance of electrocoagulation using iron electrodes for the removal of hexavalent chromium from synthetic aqueous solutions and actual industrial electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, applied current density, initial metal ion concentration, COD and time of electroprocessing were investigated. The optimum pH was f...

متن کامل

Removal of nickel, copper, zinc and chromium from synthetic and industrial wastewater by electrocoagulation

In this work, the performance of electrocoagulation with aluminum electrodes for simultaneous removal of nickel, copper, zinc and chromium from synthetic aqueous aliquot solutions and actual electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, current density, initial metal ion concentration, COD and contact time were investigated. Best...

متن کامل

Optimization of organic compounds removal from Wastewater by Electrocoagulation

Introduction: As the most hazardous sewage, hospital wastewater contains various contaminants, and its uncontrolled discharge can seriously damage the environment. Bandar Abbas is located in an arid and semi-arid region therefore, hospital wastewater should be treated through an appropriate and economic method. This study aimed to determine the efficiency of electrocoagulation with aluminum and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Engineering Science

سال: 2021

ISSN: 2706-6835,2075-4914

DOI: 10.3329/jes.v12i1.53098