Basic Study on TIG-MIG Hybrid Welding Process
نویسندگان
چکیده
منابع مشابه
Tig Welding Process Pdf
Tungsten inert gas (TIG) welding, also called as gas tungsten welding 1. (a) Schematic of TIG welding Process (b) Variety of tungsten electrodes. The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid. Tungsten inert gas welding, TIG is widely applied in manufacturing process for different The ...
متن کاملOptimization of TIG-MIG hybrid welding of 316L austenitic stainless steel
In the TIG-MIG hybrid welding, higher weld efficiency and better weld quality are obtained with respect to each individual TIG and MIG welding methods. Moreover, in this method, the MIG arc is more stable in pure argon shielding gas. Therefore, in this study, the influence of TIG-MIG hybrid welding parameters on the welds appearance quality and welds depth to width ratio of a 316L austenitic st...
متن کاملOptimization of TIG-MIG hybrid welding of 316L austenitic stainless steel
In the TIG-MIG hybrid welding, higher weld efficiency and better weld quality are obtained with respect to each individual TIG and MIG welding methods. Moreover, in this method, the MIG arc is more stable in pure argon shielding gas. Therefore, in this study, the influence of TIG-MIG hybrid welding parameters on the welds appearance quality and welds depth to width ratio of a 316L austenitic st...
متن کاملInfluence of Electromagnetic Fields on Environment in TIG welding process
Primljeno (Recieved): 2011-07-13 Prihvaćeno (Accepted): 2011-11-15 Original scientific paper This paper presents welding current influence on spreading of electromagnetic field in TIG welding process. The quality of welding is analyzed by „Fast Fourier Transformation“ (FFT) on recorded current. Electric and magnetic field are measured using an instrument „Macshek ESM – 100 3D Fieldmeter“ [1]. W...
متن کاملA Ga–ann Hybrid Model for Prediction and Optimization of Co2 Laser-mig Hybrid Welding Process
The paper presents a hybrid model of an Artificial Neural Network (ANN) and Genetic Algorithm (GA) for modeling of a hybrid laser welding process. This model is employed for the prediction and optimization of penetration depth with corresponding process parameters. A single program developed for the purpose initially establishes an optimized ANN architecture using a Back-Propagation Neural Netw...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2012
ISSN: 0288-4771
DOI: 10.2207/qjjws.30.29