Basic Combustion Characteristics of High Density Solid Biomass Fuel
نویسندگان
چکیده
منابع مشابه
Biomass Characterization and its Use as Solid Fuel for Combustion
(Received: January 8, 2012; Accepted: Februray 8, 2012) Abstract: The power industry is confronting challenges with seemingly conflicting goals. They provide the economy of scale needed to minimize the cost of production. Consumers, including industry, rely on affordable, dependable electrical energy. It’s an important part of our economy and our daily lifestyle. However, reducing emission leve...
متن کاملOxy - fuel combustion of coal and biomass blends
The ignition temperature, burnout and NO emissions of blends of a semi-anthracite and a high-volatile bituminous coal with 10 and 20 wt.% of olive waste were studied under oxy-fuel combustion conditions in an entrained flow reactor (EFR). The results obtained under several oxy-fuel atmospheres (21%O2-79%CO2, 30%O2-70% CO2 and 35%O265%CO2) were compared with those attained in air. The results in...
متن کاملCarcinogenicity of household solid fuel combustion and of high-temperature frying.
In October, 2006, 19 scientists from eight countries met at the International Agency for Research on Cancer (IARC) in Lyon, France, to assess the carcinogenicity of household solid fuel combustion (coal and biomass) and of high-temperature frying. These assessments will be published as volume 95 of the IARC Monographs. About half of the world’s population, mostly in low-resource and mediumresou...
متن کاملSulfur Release from Cement Raw Materials during Solid Fuel Combustion
During combustion of solid fuels in the material inlet end of cement rotary kilns, local reducing conditions can occur and cause decomposition of sulfates from cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, which may cause deposit formation in the kiln system. SO2 release from cement raw materials during combustion of solid f...
متن کاملGrate Furnace Combustion: A Submodel for the Solid Fuel Layer
The reduction of NOx-formation in biomass fired grate furnaces requires the development of numerical models. To represent the variety in scales and physical processes playing a role in the conversion, newly developed submodels are required. Here, a submodel for the reverse combustion process in the solid fuel layer on the grate is described. The submodel is shown to give good predictions for th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Smart Processing
سال: 2018
ISSN: 2186-702X,2187-1337
DOI: 10.7791/jspmee.7.39