Barium Titanate-reinforced Acrylonitrile-Butadiene Rubber: Synergy Effect of Carbon-based Secondary Filler
نویسندگان
چکیده
منابع مشابه
mechanical and morphological properties of short nylon fiber reinforced acrylonitrile-butadiene rubber composites
acrylonitrile butadiene rubber (nbr) composites are prepared from waste nylon 66 short fiber using a two-roll mill mixer. the effects of fiber content and bonding agent on the mechanical and morphological properties of the composites are studied. the curing characteristics of the composites have been studied by using cure rheometer. the cure and scorch time of the composites decrease while cure...
متن کاملImproved curing conditions and mechanical/chemical properties of Nitrile Butadiene Rubber Composites Reinforced with Carbon Based Nanofillers
Multiwall carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) with contents ranging from 1 to 10 phr (part per hundred parts of rubber) were selected and then characterized to reinforce acrylonitrile butadiene rubber (NBR) based composites. Fabrication of nanocomposites were done by a novel procedure and structural analysis along with variety of mechanical and chemical tests, according to th...
متن کاملBarrierity of hydrogenated butadiene-acrylonitrile rubber and butyl rubber after exposure to organic solvents.
Resistance of antichemical clothing primarily depends on the type of material it is made from, in particular on the type of polymer used for coating the fabric carrier. This paper reports on systematic investigations on the influence of the cross-linking density of an elastomer and the composition of a cross-linked elastomer on its resistance to permeation of selected organic solvents. Tests of...
متن کاملGloves against mineral oils and mechanical hazards: composites of carboxylated acrylonitrile–butadiene rubber latex
Resistance to permeation of noxious chemical substances should be accompanied by resistance to mechanical factors because the glove material may be torn, cut or punctured in the workplace. This study reports on glove materials, protecting against mineral oils and mechanical hazards, made of carboxylated acrylonitrile-butadiene rubber (XNBR) latex. The obtained materials were characterized by a ...
متن کاملAn investigation on chloroprene-compatibilized acrylonitrile butadiene rubber/high density polyethylene blends
Blends of acrylonitrile butadiene rubber/high density polyethylene (NBR/HDPE) compatibilized by Chloroprene rubber (CR) were prepared. A fixed quantity of industrial waste such as marble waste (MW, 40 phr) was also included. The effect of the blend ratio and CR on cure characteristics, mechanical and swelling properties of MW-filled NBR/HDPE blends was investigated. The results showed that the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Polymer Science
سال: 2021
ISSN: 0256-7679,1439-6203
DOI: 10.1007/s10118-021-2528-9