Barium Titanate Admittance‐Temperature Characteristics
نویسندگان
چکیده
منابع مشابه
Piezoelectric Vibration Energy Harvesting Characteristics of Barium Titanate Laminates
This paper studies the vibration energy harvesting characteristics of poled barium titanate (BT) unimorph cantilevers both analytically and experimentally. The unimorph cantilever consists of the BT layer and Cu shim, and the BT layer has sensing, grounding and driving electrodes. The output voltage of the cantilever excited by bending vibration was predicted by three dimensional finite element...
متن کاملFerroelectric Lead Zirconate Titanate and Barium Titanate Nanotubes
Wetting of the pore walls of porous templates is a simple and convenient method to prepare nanotubes. Ferroelectric lead zirconate titanate and barium titanate nanotubes were fabricated by wetting of porous silicon templates of polymeric precursors. The ferroand piezoelectric properties of an individual ferroelectric either of a PZT or a BaTiO3 nanotube were electrically characterized by measur...
متن کاملBarium Titanate Nanoparticles in Block Copolymer
Cubic BaTiO3 particles of∼10 nm were crystallized predominantly within the hydroxylated polybutadiene matrix of a phase separated triblock copolymeric thin film of polystyrene-polybutadiene-polystyrene (Kraton D1102). The barium titanated Kraton thin film had remnants of the cylindrical morphology of a plain Kraton thin film with an interdomain spacing of ∼23 nm. The procedure of barium titanat...
متن کاملMorphology-controlled synthesis of barium titanate nanostructures.
This study reports the synthesis of morphology-controlled BaTiO(3) nanostructures such as spherical, cube-shaped and rod-shaped BaTiO(3) using a molten-salt synthesis method. This method synthesized products from a reaction of BaO/BaCO(3) and TiO(2) with a eutectic mixture of NaCl-KCl flux at 700 degrees C for 1 h. The experiment used powder X-ray diffraction, field emission scanning electron m...
متن کاملSynthesis of Barium-zinc-titanate Ceramics
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered at 1250 °C for 2h with a heating rate of 10 °C/min. X-ray diffraction analysis of obtained powders and sintered samples was performed in order to investigate changes of the pha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Acoustical Society of America
سال: 1953
ISSN: 0001-4966
DOI: 10.1121/1.1917554